As an Amazon Associate I earn from qualifying purchases.
1. iMBAPrice #ad
IMBAPrice, RJ45 Network Cable Tester for Lan Phone RJ45/RJ11/RJ12/CAT5/CAT6/CAT7 UTP Wire Test Tool #adiMBAPrice #ad
- Cable type: rj11 telephone cable and RJ45 LAN cable. Visible LED status display. Connectors: ethernet cat 5, ethernet cat 6, ethernet Cat 5e, ethernet cat 7, RJ11 6P and RJ45 8P. Power source: dc9V Battery Required not included.
Cable state testing 2-wire: line DC detecting, Ringing signal detecting open, anode and cathode determination, short and cross circuit testing. Automatically runs all tests and checks for continuity, open, shorted and crossed wire pairs.
2. TRENDnet #ad
TRENDnet Network Cable Tester, Accurately Test Pin Configurations up to 300M 984 ft, Tests Ethernet/USB & BNC Cables, TC-NT2 #adTRENDnet #ad
- Local & remote testing: a transmitter unit facilitates loop testing and a receiver unit allows for cable testing in locations away from the transmitter unit. Pin testing: the network cable testers identifies proper, severed, short circuit, and cross connected pins.
Transmitter interface: 2 x test ports, Auto test button, Manual test button, Power/tone switch, LED indicators. Compatible cables: cat 7, 5e, 3, coax cable, 6a, 6e, 4, 6, 5, 3e, usb and 1394 cable with TC-NTUF.
Also included: 2x rj-45-to-bnc Adapters, Network Patch Cable, Carry Pouch. Receiver interface: Test port, LED indicators. Not designed for live wires. Connecting tester to a live wire may damage the tester. Manual scan: manual scan is well suited for loop back cable testing.
Cable testing distance: Tests over cables lengths of up to 300 meters 984 ft. Continuous scan: continuous scan mode is design to accommodate testing with cable ends in different locations. Accurately check cables & ports: the comprehensive cable tester for network professionals allows you to accurately check pin configurations for Ethernet cables, BNC cables, USB cables with TC-NTUF sold separately, and patch panel ports.
|Warranty||Comes with Manufacturer Warranty.|
3. Fluke Networks #ad
Coax and VoIP, Qualifies and Troubleshoots Category 5-6A Cabling for 10/100/Gig Ethernet, Fluke Networks CIQ-100 Copper Qualification Tester #adFluke Networks #ad
- Advanced troubleshooting features; length, distance to fault, shorts, opens, graphical wire mapping, power over Ethernet POE detection. Works on live networks to provide Ethernet switch detection and device configuration.
Requires intellitone 200 Digital Probe included with CIQ KIT. Locate and trace cables with digital toning technology. Qualifies cabling performance for 10/100/Gig Ethernet, coax, tests and troubleshoots all copper media cabling: Twisted pair Category 5 6A, and audio.
Includes cableiq qualification tester with detachable wiremap adapter, 2 RJ45/RJ 45 patch cord, coax 'F' push on adapter, user guide, soft carry case, USB cable, 4 AA batteries, 1 year warranty.
|Brand||Fluke Networks #ad|
|Manufacturer||Fluke Networks #ad|
4. Monoprice #ad
Monoprice Quick RJ-45 Network Cable Tester 108130 #adMonoprice #ad
- In step mode the tester steps through each wire independently with each press of the Test button. In auto mode it makes a single Pass Over The Cable And Gives A Result. This cable tester is designed to Troubleshoot Rj45 Lan Cables, Both Utp And Stp.
It shows whether the cable passed or failed and, if it failed, the type of failure and the affected pins/wires. The tester has two basic Testing Modes: Auto And Step. It not only tells you if the cable passes or fails the Test, Shorted, It Indicates Which Pins Fail And Whether They Are Open, Or Crossed.
5. foto4easy #ad
Foto4easy Telephone RJ45 RJ11 RJ12 Cat5e Cat6 USB UTP Network LAN Cable Tester Test Tool #adfoto4easy #ad
- Capable to judge wrong connection, short circuit and open circuit. Cable tester for rj12, cat 5, cat 5e, at&t 258 a, 10/100 base-t, rj45, rj11, TIA-568A/568B. Verifying cable continuity, open, short and cross wire pair up to 1000ft with remote kit.
Test correspondingly double-twisted cables 1, 2, 4, 3, 6, 7, 5, 8 and Ground. Etc. 9 led lights to indicated wiring connection on both remote and master unit.
6. Optimal Shop #ad
Optimal Shop 4 in 1 Network Cable Tester RJ45/RJ11/USB/BNC LAN Cable Cat5 Cat6 Wire Tester #adOptimal Shop #ad
- Can test from 2 remote points. Rj-11/rj-45 are equipped with 50u gold plating. Fast speed testing. Powered by a 9V Alkaline battery. Ergonomic portable handheld design.
Remote unit stores in Main unit. Simple one button test. Test installed wiring or patch cables. Low battery indicator. Test 4 types of cables: rj-45, rj-11, usb and bnc. Leds indicate connections and faults of wire and pins.
Beeper provides audible annunciation of test results. Straight or crossover indications. Not included Convenient battery access. High quality warranted. 300 feet test distance rj-45/rj-11/bnc. Bnc terminator 25/50 ohm indications. Tests shielded stP or unshielded UTP LAN cables. Test shields in USB cables.
|Brand||Optimal Shop #ad|
|Manufacturer||Optimal Shop #ad|
|Part Number||FBA_Optimal Shop|
7. Pyle #ad
HDMI High Definition Cable Tester, Test Up to 19 Type A HDMI Cables, Battery Operated HDMI Connector Line Finder, Wire Tracker w/ LED Light Indicator, Pyle PHCT85, Continuity Checker #adPyle #ad
- Use this tester to troubleshoot HDMI cables before installing them. Quick testing: offers easy way to make sure your hdmi cables are working properly. Measures 4. 06” x 3. 57” x 1” which makes it portable and handy. Led indicator: the led panel features 9 light indicators that let you know if your cable has full continuity and which pins are functioning or broken.
Battery operated: the hdmi wire checker operates on 9V battery which are not included. Simply hook the hdmi connector to the female port on the tester and press the “test” button.
Made to last, and is a great long-term solution to help keep your home setup running smoothly. Rugged and durable: the pyle hdmi cable tester is built in a strong, compact plastic casing.
Device can quickly scan and test up to 19 wires and decide which one is short circuit, open circuit, or in wrong order. Definitely, a one-stop handy solution to help identify HDMI cable continuity issues in your setup. That way you can repair any broken pins or purchase a new cable while you still have time. Hdmi female type connections: tests standard type “a” hdmi connectors and all connections are HDMI female type.
|Manufacturer||Sound Around #ad|
|Warranty||One year limited|
8. FUNRUI #ad
Network Tool Kit, Internet Coupler 65pcs Set, FUNRUI 7 in 1 Professional Ethernet Network LAN Kit RJ11 RJ45 Cat5e Cat6 Cat7 Wire Cable Tester Crimping Tool Crimper, 50pcs RJ45 Coupler Joiners #adFUNRUI #ad
- 3, networking cable tester: tests twisted-pair straight & crossover cables: RJ-45 & RJ-11, tester detects if wires are connected correctly. 1, 7 in 1 professional network computer repair tools in one set, suitable for your Ethernet LAN network maintenance and repaired.
2, 10pcs case covers for rj-45 connectors, tool set includes network cable tester, 9V battery, 50pcs standard RJ45 Cat5e Cat6 connectors, 3 in 1 crimper tool, RJ45 internet straight through coupler, yellow mini stripping knife.5
5, cat7. Gold plated leads for better data transmitting and higher signal strength. 3 in 1 crimper tool won't damage the shelled-wire and works efficiently. Portable: lightweight, specially designed to work with RJ45 Network Cable Cat5, Cat6, Cat5E, Cat6E, easy to carry.4, premium material: the mouth of the press pliers is made of magnetic steel, which is hard and durable.