Top 10 ZHIYUN Crane V2 Accessories – Professional Video Stabilizers

As an Amazon Associate I earn from qualifying purchases.

1. Neewer

#ad

Neewer Carbon Fiber Dual Handle Grip, Diameter Adjustable 25-45mm Compatible with Zhiyun Crane 2/Crane V2/Crane Plus/Crane/Crane M/ Feiyu G6 Plus/A1000/A2000/MOZA Air Aircross Gimbals Only Grip

#ad
Neewer #ad - You can hold it tightly without worrying about the falling off due to enduring application. Lightweight and durable: made of carbon fiber, lightweight yet solid and durable so to safely secure gears to the gimble grip and easy to hold.

Non-slip design: the 2 handles are made of rubber with anti-slip design to increase friction. Multi-choices of holding ways: provide various shooting ways including positive grip gesture and inverted grip gesture; Can realize shooting in different angles, and finish the shooting in most of circumstances. Multiple 1/4-inch screw holes: 1/4 inch screw threads holes on the grip enable you to connect field monitor, led light, Bluetooth remote or any other accessories to your cameras.

Note:not support DJI Ronin-S. Adjustable holder socket design: suitable for gimbles diameter within 098-1. 77 inch/25-45 mm, crane m, crane plus, crane v2, feiyu g6 plus, a1000, a2000, crane, Compatible with Zhiyun Crane 2, MOZA Air Aircross and other gimbles as long as its diameter is from 25-45mm.
BrandNeewer #ad
ManufacturerNeewer #ad
Weight1.75 Pounds
Part Number10093965
Model10093965

2. PERGEAR

#ad

PERGEAR Aluminum Mini Tripod for Zhiyum Crane V2 Zhiyun Crane-M Zhiyun Smooth Q Zhiyun Smooth 3 III II Moza Air Moza Mini-C Moza Mini-G Feiyu G4 Pro Godox A1 Phone Flash

#ad
PERGEAR #ad - 1/4 screw thread, Wide Compability. The tripods have been upgraded with A New Complete Sturdy ScrewSee Second Photo for More Details. Soft plastic Foot Pad. Aluminum mini tripod, Lightweight, Durable and Portable.
BrandPERGEAR #ad
Manufacturerpergear #ad
Height2.44 Inches
Length7.09 Inches
Width0.91 Inches
Part Number2724591910262
Model2724591910262

3. SMALLRIG

#ad

SMALLRIG Mounting Rod Clamp Ring for Zhiyun Crane2 Crane v2 Crane Plus Gimbal Stabilizer for DSLR Camera with 1/4" & 3/8" Thread Locating Points, 18 lb Payload- 2119

#ad
SMALLRIG #ad - High customizationthe rod clamp is specially designed only for zhiyun crane2 / Crane v2 / Crane Plus handheld gimbal stabilizer. This clamp can be attached to 4 positions on the Crane 2, and 1 position on the Crane V2 handle as shown in the picture.

Locating point for arrifeatures 3/8’’ locating holes for arri standard on the side allowing to be attached an Anti-Rotation Magic Arm 2026 to hold your monitor. Mounting pointsthe extension ring is equipped with a lot of 1/4’’-20 threaded holes that allow you to attach more accessories, such as SmallRig magic arm 2070 and Cold Shoe 1960 Please notemax load: 8.

5kg18lbs. Handheld setupit allows mounting a rod clamp and then two 15mm rods with Shoulder Pad 2077, as well as Handle 998 to hold your Zhiyun Crane 2/V2 on your shoulder. It could support most of the camera, and camera accessories such as a monitor, led, microphone, camera handle, etc.
BrandSMALLRIG #ad
ManufacturerSMALLRIG #ad
Height0.47 Inches
Length3.31 Inches
Weight0.21 Pounds
Width2.62 Inches
Part Number2119-AU
Model4336305231

4. SMALLRIG

#ad

2222, SMALLRIG Universal Wooden Left Side Handle for DJI Ronin S/Ronin SC/Zhiyun Crane 2 / Crane V2 Series Gimbal Stabilizer w/Cold Shoe, 3/8'' Locating Holes for ARRI Standard

#ad
SMALLRIG #ad - What you geta wooden handle, 30-day No-hassle Return Service, friendly 24-hour customer Support, Worry-free 2-year Warranty. Comfortable to hold and effective to improve your shooting experience. Attached to the bottom of gimbal via two detachable screws 1/4 and 3/8 screws, perfect for RoninS.

High customizationuniversal wooden left side handle 2222 is exclusively designed for ronin s / zhiyun Crane 2 / ronin sc / Crane V2 Series Gimbal Stabilizer. Scratch resistancethe rubber cushion on the bottom is helpful to protect from scratching. Well-balancedassist in the stabilization so you could get a better grip on your rig so as to get a better movement.

Mutilple connectionsfeatures 1/4 threads, such as smallrig ballheads 2070 . With the built-in cold shoe, you can attach a SmallRig Shoe Mount 1875 ASIN: B01M3SHVGX to mount a monitor onto it. With the 1/4 and 3/8 threaded holes at the bottom of the handle, 3/8’’-16 locating holes for ARRI standard that allows you to attach more accessories, you can attach the original tripod or base plate SmallRig Baseplate for Manfrotto - 1280 .
BrandSMALLRIG #ad
ManufacturerSMALLRIG #ad
Height2.36 Inches
Length5.98 Inches
Weight0.91 Pounds
Width5.51 Inches
Part Number2222-SR
Model2222-SR

5. NICEYRIG

#ad

DJI Ronin S/SC, 336, NICEYRIG Wooden Side Grip Handgrip Universal Tripod Mount Gimbal Handle for Zhiyun Weebill S/Crane 3S/2S/M2 Series

#ad
NICEYRIG #ad - Maximum Payload 17. 6 lb. Scratch resistance rubber pad on the bottom to prevent your gimbal or camera scratching and twist. Attach accessories features a cold shoe and arri locating hole on the top of the handle, plus an abundance of threaded holes on the sides to attach microphone, monitor, flash light or magic arm.

Last long made of solid aluminium alloy and wood, comfortable to hand held and effective to improve your shooting experience. High compability niceyrig wooden grip 336 could be mounted on the tripod of dji ronin s/sc, zhiyun crane 3 lab/2/v2/plus and Moza Aircross 2 most stabilizers, plus mirrorless camera as a side handle via a 1/4’’-20 or 3/8’’-16 quick release screw. L type bracket the detachable extension arm comes with multiple 1/4’’-20, 3/8’’-16 locating holes, which is like a L type bracket for rich extension possibilities.
BrandNICEYRIG #ad
ManufacturerNICEYRIG #ad
Weight0.55 Pounds
Part NumberUS-336

6. zhi yun

#ad

Zhiyun TransMount Quick Setup Kit 1/4" Thread Mount Well Compatible for Zhiyun Zhiyun Weebill S WEEBILL LAB Crane Plus Crane 2 Crane V2 Crane M with PERGEAR Cleaning Cloth

#ad
zhi yun #ad - Quick release and setup design〗quick setup kit originally created by zhiyun allows you to release and set up the tripod/monopod on the stabilizer quickly instead of screwing.

Reliable quality〗High performance aluminum alloy materials make sure the quality. Universal 1/4 thread mount〗adopting 1/4" thread mount, it is not only an accessory exclusive to WEEBILL LAB. It can be applied in monopod and monitor to realize quick setup. The kit allows you to switch between upright mode and underslung mode in a second. Note: with transmount quick Setup Kit: Only a few seconds, you can change yourholding gesture. Without transmount quick Setup Kit: Screwing the tripod/monopod ontothe stabilizer will take several minutes. Compact and portable〗Trans Mount Quick Setup Kit is highly portable.
Brandzhi yun #ad
Manufacturerzhiyun #ad
Part NumberZhiyun TransMount Quick Setup Kit

7. decade

#ad

DECADE Universal Left Side Handle Grip Compatible with DJI Ronin S/Zhiyun Crane 2/Crane V2 Series Gimbal Stabilizer

#ad
decade #ad - The rubber cushion on the bottom is helpful to protect from scratching. Lightweight and durablecnc aluminum alloy body and rubber grip protector. Comfortable to hold and effective to improve your shooting experience.

Easy to carryquick disassembly and assembly for easy storage and carrying. Suitable for multiple modelsthe l shaped grip is designed for zhiyun and dji gimbal stabilizers. Suitable for dji ronin s/zhiyun crane, crane 2, crane v2, Crane Plus, Crane M/Feiyu Gimbal Moza and other Handheld Gimbal which has 1/4 Screw. Mutilple connectionsfeatures 1/4 and 3/8 locating holes for ARRI standard that allows you to attach more accesseroies, such as magic arm monitor microphone or LED light. What’s in the boxyou can get the handle grip and great shooting experience with your gimbal. Additional 2 years warranty.
Branddecade #ad
ManufacturerDECADE #ad
Part NumberL01

8. CAMVATE

#ad

CAMVATE Side Handgrip Rubber-Covered L Type for DJI Ronin-S/SC & Zhiyun Crane 2 / V2 Stabilizer Gimbals

#ad
CAMVATE #ad - Mounts via 1/4"-20 or 3/8"-16 mounting studs. Material: anodized aluminum alloy & rubber. Features l shape, rubber-covered and light weight. 1/4" mounting points available for accessories. For dji ronin-s/sc & zhiyun Crane 2/V2 Stabilizer Gimbals.
BrandCAMVATE #ad
ManufacturerCAMVATE #ad
Height3.2 Inches
Length6.9 Inches
Weight0.56 Pounds
Width6.5 Inches
Part NumberC2450-us

9. SMALLRIG

#ad

SMALLRIG Aluminum Side Handle Compatible with DJI Ronin-S/SC & ZHIYUN Crane 2S/2/V2 & MOZA Air 2/AirCorss 2 Gimbals, 2786

#ad
SMALLRIG #ad - It enables you to hold your gimbals with two hands to reduce the weight stress on one hand. This handle reduces arm fatigue and provides accessory mounts when shooting with your gimbals. Universality for both sidesthe handle can be configured for right or left hand based on your needs.

Built-in wrenchto ensure your gimbal is secure onto the handle, a built-in wrench is included, which stores on the bottom of the handle. Besides, the base features rubberized padding to prevent damage to your gimbal as well as to prevent twisting. Sweet designthe aluminum handle features a soft, ergonomic silicone design for comfort and a solid grip. High customizationsmallrig side handle 2786 is exclusively designed for dji ronin-s/ sc & zhiyun Crane 2S/Crane 2/V2 & Moza Air 2/AirCorss 2 Gimbals.

Mounting pointsthis handle connects to the bottom of your gimbal via 1/4"-20 and 3/8"-16 mounting screws. Also, it features multiple 1/4"-20, camera plate, such as the original gimbal tripod, ARRI 3/8"-16 threads and a cold shoe for accessory attachment, and Monitor Mount BSE2346.
BrandSMALLRIG #ad
ManufacturerSMALLRIG #ad
Height6.77 Inches
Length2.17 Inches
Width4.72 Inches
Part Number2786-SR

10. DF DIGITALFOTO

#ad

DF DIGITALFOTO Universal L Bracket Handle Gimbal Accessories,Mounting Monitor/Microphone with Bean Grip Compatible with DJI Ronin S/SC,RS2/RSC2/Zhiyun Crane V2/M/2,Moza Air 2,Feiyutech AK2000/4000 etc

#ad
DF DIGITALFOTO #ad - With 1/4 screw holeit can install magic grip to connect monitor or microphone etc. After servicethe warranty is 12 months, if you have any problem about this item, you can contact us at any time. Mateialit is made of alloy aluminum, so it is strong and durable. With 3 hot shoe mountso it can install more accessoies with the Gimbal to get more functions. High customizationit is suitable with zhiyun crane 2 /weebill s/crane plus dji ronin S MOZA AIR 2 Almost All Gimbals with 1/4 screw hole.
BrandDF DIGITALFOTO #ad
ManufacturerDF DIGITALFOTO #ad
Weight0.88 Pounds
Part NumberM-0667II
ModelM-0667II