As an Amazon Associate I earn from qualifying purchases.
1. XRDS -RF #ad
SMA Male Crimp Solder Attachment Connector Kit for LMR400 RG8 KMR400 RG8/U Belden-9913 Low-Loss Coax Cable, XRDS-RF SMA Crimp Connectors 10 PCS #adXRDS -RF #ad
- With shrink tube ：10 piece sma male connectors Heat Shrink Tube, it connected with any brand SMA female connector. Great quality：body brass nickel plated. Salt spray test for 96 hours. Built to last：≥ 1000 cycles have a reliable signal every time.
Pin Gold plated. Low loss low swr ：the attenuates signal of this lmr400 sma male connector is less than 01db. Insulator PTFE Teflon. Compatible cable type : this sma male connector crimp connector work great with LMR400, 7D-FB, KMR400, RG8, RG213 Coaxial Cable. Swr≤ 1. 15 dc-6000mhz.
2. GEMEK #ad
GEMEK Pure Copper Coax Cables for 3G/4G/5G/LTE/ADS-B/Ham/GPS/WiFi/RF Radio to Antenna or Surge Arrester Use Not for TV, 100 ft Low-Loss Coaxial Extension Cable 50 Ohm SMA Male to N Male Connector #adGEMEK #ad
- Compatible with all sma female to n female based equipment including modems and routers & WiFi Signal Booster Repeater from Cisco, Sierra Wireless, Proxicast, Pepwave, Digi, Cradlepoint, Sixnet/Red Lion and many others.
Connector: all-copper SMA Male to N Male adapter. 100 feet32 meters low-loss s-lmr400 size coax, impedance: 50 ohm. High frequency low loss and low impedance, heat Shrink on Both Ends. Double shielded coax extension cable assemblies are constructed with top quality extremely low-loss S-LMR400 cable and gold plated connectors.
S-lmr400 offers a significantly larger center conductor and supports better signal retention for longer cable runs and higher frequency use. Connect from sma equipment to n-style Antennas, meters, receivers, radio transmitters and WiFi Signal Booster Repeater.
3. AIR802 #ad
AIR802 SMA Plug-Male Crimp Connector CA400, Belden 9913 Size Cables, Times Microwave's LMR400, RG8 #adAIR802 #ad
- Crimp style ferrule Ring and Crimp or Solder Pin. Sma plug-male Crimp Style Connector. Frequency range dc ~ 11 GHz; 50 Ohm Impedance. Sized for air802 ca400, times microwave's lmR400, RG8, Belden 9913 Coax. Nickel plated brass Body, Gold Plated Brass Pin.
4. MPD DIGITAL KEEPING YOU CONNECTED QUALITY US MADE CABLE ASSEMBLY #ad
MPD Digital lmr400-n-sma-jumper-3ft LMR-400 Coax Cables with N Male and SMA Male Connectors #adMPD DIGITAL KEEPING YOU CONNECTED QUALITY US MADE CABLE ASSEMBLY #ad
- Outer jacket material: flexible uv proof fr-pe, outer diameter:. 400 103mm nom. Srl: per mil-c-17/74. The sma connector on this cable will not fit most WiFi or Wireless Routers.
Assembled by mpd digital - a dod supplier - in our GA Facility using MILSPEC Components. Us made ultra low-loss double shielded mpd digital lmr-400 coaxial Cable exceeding all US, NATO and IDF MIL-C-17 Standards.
5. GEMEK #ad
Antenna Lead Extender for 3G/4G/5G/LTE/ADS-B/Ham/GPS/WiFi/RF Radio Use Not for TV, 75 ft Low-Loss Coaxial Extension Cable 50 Ohm SMA Male to SMA Female Connector, GEMEK Pure Copper Coax Cables #adGEMEK #ad
- Connect from sma equipment to sma female Antennas, meters, receivers, radio transmitters and WiFi Signal Booster Repeater. S-lmr400 offers a significantly larger center conductor and supports better signal retention for longer cable runs and higher frequency use.
Compatible with all sma-based equipment including modems and routers & WiFi Signal Booster Repeater from Cisco, Sierra Wireless, Cradlepoint, Proxicast, Digi, Pepwave, Sixnet/Red Lion and many others.7
75 feet23 meters low-loss s-lmr400 size coax, impedance: 50 ohm. Double shielded coax extension cable assemblies are constructed with top quality extremely low-loss S-LMR400 cable and gold plated connectors. Connector: all-copper sma male to SMA Female adapter. Note: not rp-SMA Cable. High frequency low loss and low impedance, heat Shrink on Both Ends.
6. Areyourshop #ad
Areyoushop 10Pcs Connector SMA Male Plug Crimp RG8 RG213 LMR400 RG214 9913 Cable Straight #adAreyourshop #ad
- Impedance: 50¦¸. Connector center conductor: Plug. Connector outer conductor: Male. Screw thread Type: English. Insulators: PTFE.
7. XRDS -RF #ad
50 Ohm Ultra Low Loss Extension Cable for ADS-B/4G/5G LTE/Ham/GPS/Radio/Moden by XRDS-RF Not for TV, N Male to SMA Male Coax Cable 1ft #adXRDS -RF #ad
- Prevent came off: in the n male to sma male rg8 cable we use expensive heave n male mount clamp connector, not the cheap crimp type of easy came off, the end connections are solid. Low loss: high density tinned copper braid 100% shield, ultra low loss, 1 ft rg8 coaxial cable n male to sma male attenuates signal only 022db at 1090mhz.
If you chose rg8 coax cable n-male to sma-male for your 1090Mhz RPi receiver, the cable had 60% less loss than the cheap rg58.
Durable solidly built: solid copper conductor, designed for 20 year outdoor exposure in harsh environments. All-copper gold plated industries waterproof sma male to n male connectors, flexible uv proof rf-pvc jacket, make a secure connection.
6000mhz vswr< 1. 15. Professionally made:each rg8 n male to sma male cable swept with USA KEYSIGHT E5071C ENA network analyzers. Lengthen thickening adhesive-lined shrink tube:rg8 coaxial cable n male to sma male with black heat shrink tube, length up to 2. 2 in. Has good sealed end connections, prevent came off.
8. XRDS -RF #ad
XRDS -RF KMR400 RF Coaxial Cable 50 Ohm Low Loss Coax Cable 50 Feet #adXRDS -RF #ad
- Premium materials— the inner conductor of this heavy duty cable is copper clad aluminum so it is efficient and causes low signal loss. The jacket is made of the flexible and proof-water pvc that could be used so long in the harsh environments in the outdoor.
After-sale warranty— xrds -rf is a professional manufacturer in producing coax cable. This kmr 400 cable is LMR400 cable equivalent. Compatibility— this ultra low-loss lmr400 coaxial cable is designed to work with all devices and appliances with 50 Ohm impedance.
Ultra low loss— this 50 feet kmr400 coax cord without connector is black in color and it is Ultra Low-Loss Coax Cable. Product length— the length of this lmr400 bulk coax cable is 50 feet and you could cut the cable according to your need.
Fits standard connectors such as n type connector, uhf connector, sma connector, bnc connector. It can be used in almost any application where handling characteristics and when improved Shield and low loss is required. This cable allows transfer of signals over large distances with minimum signal loss. Any question please do not hesitate to contact us, and we will try our best to resolve your problem.
|Brand||XRDS -RF #ad|
|Manufacturer||XRDS -RF #ad|
|Part Number||KMR400 Coax Cable 50ft|
|Model||KMR400 cable 50ft|
9. Riotaxy #ad
Pack of 10 N Male Plug Crimp Coaxial Connector 50 ohm for LMR400 Belden 9913 RG8 Nickel Machined Brass Construction 10 Piece N Male for lmr400 #adRiotaxy #ad
- 4. 10 piece connectors with Black heat shrink tube, It connected with any brand N female connector. Work with the 50ohm low loss rf cable :lmr-400 and Belden 9913 and L-com ca-400 and RG8. 1. Lmr400 n connector, body brass nickel plated, pin brass gold plated, TeflonPTFE Insulator, 50 ohm.
Coaxial connector, insulation resistance :≥ 5000MΩ Durability :≥ 500 cycles. 5. 3. Crimp male n, is reliable, it is easy to install, and is built to last.2. N connector, salt spray test for 48 hours, VSWR below 1. 3dc-6g.
10. E-outstanding #ad
E-outstanding 2 x SMA/SMA Type Adapter SMA-Female Plug to SMA-Female Jack Waterproof Bulkhead Panel Mount RF Coaxial Antennas Connector Straight #adE-outstanding #ad
- Covert from adapter end A : SMA Jack, Female Socket. Package: 2 Pieces in a bag. Installation: convenient to use and install by simply screwing two connectors together without soldering or crimping required.
Covert to adapter end b : SMA Plug, Female Socket. Condition: 100% brand New and High Quality.