As an Amazon Associate I earn from qualifying purchases.
1. iUniker #ad
IUniker Raspberry Pi Zero Screen with Backlight Knob, 3.5 inch 60+ fps 480x320 Resolution Raspberry Pi Zero Touchscreen High Speed Pi Zero W Screen for Raspberry Pi Zero W 2/Pi Zero W/Zero 1.3 #adiUniker #ad
- Customized circuit board for 3. 5-inch, high speed Raspberry Pi touchscreen. Perfect fit your pi zero wh / zero w/ zero W 2, PORTABLE MONITOR.
Notice: only fit for raspberry Pi Zero and Zero W/ Zero W 2. Fastest 3. 5 inch touchscreen for raspberry pi zero wH / Zero w/ Zero W 2, Super HD 480x320 Resolution, 60+ fps.
2. waveshare #ad
2.13inch E-Ink Display HAT Version 2.1 Black,White Two-Color 250x122 Pixel E-Paper Screen LCD for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH and Jetson Nano SPI Interface Support Partial Refresh #adwaveshare #ad
- Operating voltage: 3. 3v/5v. Interface: spi. Display color: black, white. Partial refresh time: 03s. Full refresh time: 2s. Viewing angle: >170°. Due to the advantages like ultra low power consumption, 250x122 resolution, clear display without electricity, it is an ideal choice for applications such as shelf label, communicating via SPI interface, industrial instrument, with embedded controller, wide viewing angle, and so on.
This is 2. 13inch e-ink display hat for raspberry pi, supports partial refresh. Preserved solder pads for spi interface, for connecting with other controller boards like Arduino/Nucleo, etc.
Onboard voltage translator, compatible with 3. 3v/5v mcus. No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Standard Raspberry Pi 40PIN GPIO extension header, supports raspberry pi series boards, Jetson Nano.
|Part Number||2.13inch e-Paper Display HAT|
|Model||2.13inch e-Paper Display HAT|
3. waveshare #ad
65K Display Color ST7735S Driver, 1.44inch LCD Display HAT for Raspberry Pi 3B+/3B/2B/3B+/Zero/Zero W,128x128 Pixels SPI Interface RGB #adwaveshare #ad
- Backlight: led operating voltage: 3. 3v. This is an lcd display hat for raspberry pi, 128x128 pixels, with embedded controller, 1.44inch diagonal, communicating via SPI interface.
Driver: st7735s interface: spi display color: RGB, 65K color. Standard raspberry pi connectivity, compatible with and direct-pluggable onto Raspberry Pi 2B/3B/3B+/Zero/Zero W. 1x joystick 5-position, 3x push buttons, handy and useful.
|Part Number||1.44inch LCD Display HAT|
|Model||1.44inch LCD Display HAT|
4. waveshare #ad
Waveshare 1.44inch LCD Display HAT for Raspberry Pi 128x128 with Embedded Controller Communicating via SPI Interface. #adwaveshare #ad
- This is an lcd display hat for raspberry pi, 1. 44inch diagonal, 128x128 pixels, with embedded controller, communicating via SPI interface. Comes with development resources and manual examples for Raspberry Pi/Arduino/STM32.
1x joystick 5-position, 3x pushbuttons, handy and useful. Standard raspberry pi connectivity, compatible with and direct-pluggable onto Raspberry Pi 2B/3B/3B+/Zero/Zero W. Display color: RGB, 65K color.
|Part Number||1.44inch LCD HAT|
|Model||1.44inch LCD HAT|
5. Bicool #ad
3.5 inch Touch Screen TFT LCD for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH 480x320 Pixel XPT2046 Controller SPI Interface #adBicool #ad
- Resolution: 320*480 pixel, touch Screen Controller:XPT2046. Size perfectly fits the Pi Raspberry Pi B+/2B/3B/3B+. 3. 5 inch touch screen, resistive touch control, TFT LCD Type.
Supports any revision of raspberry pi directly-pluggable, includes 4B/3B+/3B/2B/B+/Zero/Zero W/Zero WH, etc. Drivers provided works with your own raspbian/ubuntu/kali.
Combined with the raspberry pi, allows you to: Take photos by touching up to 17 camera modes, Use software keyboard system interaction without keyboard/mouse. Supports fbcp software driver as well, allows to config software resolution and set up dual-display.
|Part Number||3.5inch RPi TFT LCD (A)|
|Model||3.5inch RPi TFT LCD (A)|
6. XYGStudy #ad
5 inch IPS 800x480 Display LCD DPI Interface no Touch Supports Raspbian Ubuntu OSMC Compatible with Raspberry Pi 2 3 4 Model B B+ A+ Zero W WH @XYGStudy #adXYGStudy #ad
- Standard raspberry pi 40pin gpio extension header, compatible with Raspberry Pi 2B/3B/3B+/3A+/4B/Zero/Zero W/Zero WH and further versions. Note: this item can be used for displaying only, if touch panel is required, please consider 5inch HDMI Capacitive Touch LCD OR 5inch HDMI Resistive Touch LCD.
The lcd is directly driven by raspberry pi dpi interface, Supports systems like Raspbian, Ubuntu MATE, refresh rate up to 60Hz, OSMC. Part number: 5inch DPI LCD. 5inch ips screen, 800x480 hardware resolution.
7. waveshare #ad
1.3inch IPS LCD Display HAT Module 240x240 Pixels SPI Interface with Embedded Controller Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ Wide Viewing Angle #adwaveshare #ad
- This is an ips lcd display hat for raspberry pi, 1. 3inch diagonal, with embedded controller, 240x240 pixels, communicating via SPI interface.
High definition in small size. Ips screen, wide viewing angle, better display. Standard raspberry pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+.
8. XYGStudy #ad
2.23 inch OLED Display HAT for Raspberry Pi 2B/3B/4B/Zero/Zero W Jetson Nano 128×32 Pixels SPI/I2C Interface @XYGStudy #adXYGStudy #ad
- Part number: 2. 23inch oled HAT. This is an oled display hat for raspberry pi, 2. 23inch diagonal, 128×32 pixels, with embedded SSD1305 driver, communicating via SPI or I2C interface. Trying to add a control interface for your Pi? This compact display would be the ideal choice.
2. 23inch oled display hat for raspberry Pi, 128×32 pixels, SPI/I2C interface. Standard raspberry pi 40pin gpio extension header, supports Raspberry Pi series boards, Jetson Nano.
9. waveshare #ad
Waveshare 7inch IPS LCD 1024X600 High Resolution Display Screen for Raspberry Pi 2B 3B 3B+ 3A+ Zero Zero W WH Supports Raspbian Ubuntu OSMC DPI Interface #adwaveshare #ad
- Compact size, suit for various projects. Backlight can be turned off to lower power consumption. Compatible with raspberry pi 2b/3B/3B+/3A+/Zero/Zero W/Zero WH. The tft lcd is directly driven by Raspberry Pi DPI interface, refresh rate up to 60Hz. Supports raspbian, OSMC, Ubuntu, etc.
|Part Number||7inch LCD for Pi|
|Model||7inch LCD for Pi|
10. waveshare #ad
4 inch HDMI LCD IPS Display 800x480 Resolution Resistive Touch Screen HDMI Interface for Raspberry Pi 3 B/3 B+/2 B/B+/B Zero W #adwaveshare #ad
- Hdmi interface for displaying, no I/Os required however, the touch panel still needs I/Os. Technical support is provided, please contact us if you have any problem.
Compatible and direct-connect with any revision of Raspberry Pi except the Pi 1 model B or Pi Zero, which requires an HDMI cable. Drivers provided works with your own raspbian/Ubuntu/Kali/Retropie, Also works as a computer monitor, in this case, touch panel is unavailable and HDMI cable is required.8
800x480 high hardware resolution, IPS display, 4 inch touch screen, high quality and perfect displaying from very wide viewing angle. Backlight can be turned off to lower power consumption.
|Part Number||4inch HDMI LCD Screen|
|Model||4inch HDMI LCD Screen|