As an Amazon Associate I earn from qualifying purchases.
Longruner #ad - Support all pri model - this raspberry pi camera compatible with Raspberry Pi 4/3/2/1 model B/ B +/ a + Pi zero & w. 1080p hd webcam - the ir video camera is capable of 2592 x 1944 pixel static images, 720 p @ 60 fps and 640 x480 P 60/90 video Recording, and also supports 1080 P @ 30 FPS, with 5MP Ov5647 1080P webcam sensor.
Csi interface - this pi camera module uses the dedicated CSI interface, via the CSI bus, A higher bandwidth Link which carries 5 megapixels data from the camera back to the processor.
HiLetgo #ad - This camera support to raspberry Pi 3B/3B+ and Pi 2B B+. Provides 3. 3v power output. 5 megapixel ov5647 sensor, supports up to 2 infrared LED and/or fill Flash. The camera is capable of 2592 x 1944 pixel static images, and also supports 1080 P @ 30 FPS, 720 P @ 60 FPS and 640 x480 P 60/90 video Recording.
Weewooday #ad - Cmos sensor interface: the camera module adopts appropriative CMOS sensor interface CSI, via the CSI bus; A higher bandwidth link that transmits 5 megapixels data from the camera back to the processor. Infrared fill light: equipped with 2 infrared fill lights, so the camera module allows you to take pictures at night and you don't have to worry about the light; The brightness of infrared light will adjust automatically based on the dark of the circumstances.
Compatibility: these infrared night vision camera modules are compatible with Raspberry Pi 4/ 3/ 2/ 1 model B/ B +/ a + except Pi Zero/ Zero W. Nice performance: the ir-cut video camera not only supports shooting 2592 x 1944 pixel static image but also supports recording 1080p@30fps, 720p@60fps and 640 x 480p 60/90 video; Featuring with 1080P 5MP OV5647 webcam sensor, 5 megapixels and adjustable focal length.
Arducam #ad - Hd resolution: this camera adopts 2mp ov2710 sensor for sharp image, Max. Plug&play: uvc-compliant, just connect the camera to PC, laptop, Android device or Raspberry Pi with the USB cable without extra drivers to be installed.
High frame rates: mjpg 30fps@1080p; yuy2 30fps@640x 480; High speed USB 2. 0 interface. Day/night vision: ir-cut filter switched in and out automatically based on light condition only visible light during the daylight and infrared sensitivity during the night with 850 IR LEDs on.
CUQI #ad - The high quality and great performance has great for the price. This infrared ir camera which compatible with raspberry pi is equiped acrylic holder case to keep the camera at a stationary angle and it can prevent the camera from loosening and tilting, surprisingly sturdy for its smaller form factor.
Widely application: recommend this camera can be used for security monitors, drone operation, DIY experiments etc, 3D Printer, robot, and even those wanting to get into stop motion productions. Camera specifications:the camera is capable of 2592 x 1944 pixel static images, 720 p / 60 fps and 640 x480 p 60/90 video recording, 70 ° diagonal, and also supports 1080 p / 30 fps, with 5MP OV5647 1080p webcam sensor, with HD Resolution and quality image.
Note:if it is used during the day, the color of the picture taken by the camera is pink or reddish, which is normal, And You can try to turn off or remove the infrared LED light. Come with 3pcs heat sink, please tear off the heat sink and stick it, If the camera working is unstable or the camera is overheated, which it has great efficient heat dissipation.
DORHEA #ad - Csi interface : this interface uses the dedicated CSI interface, via the CSI bus, a higher bandwidth link which carries pixel data from the camera back to the processor.
Camera specifications:this pi camera is capable of 2592 x 1944 pixel static images, 720 p @ 60 fps and 640 x480 p 60/90 video recording, and also supports 1080 p @ 30 fps, with 5MP OV5647 1080p webcam sensor.
Arducam #ad - Raspberry pi noir camera: this 8mp hd camera module is designed for Raspberry Pi with IMX219 8MP pixel sensor with a fixed focus lens. 8mp more than hd: supports 3280 × 2464 pixel still images, and VGA90 video modes, 720p60, as well as 1080p30, and still captures.
Please note: this camera module is only supported with the latest Raspberry Pi OS Bullseye released on January 18, not with the previous Raspberry Pi OS Legacy. Please note: this camera module is only supported with the latest raspberry Pi OS Bullseye released on January 18, 2022 and libcamera, raspistill and buster.
Before you use it, not with the previous Raspberry Pi OS Legacy, please follow the instructions to configure it. Simply connect the raspberry pi board and camera with the FPC cable and you can easily use this 8MP high-quality camera. Wide compatibility: the pinoir camera is compatible with all raspberry pi series boards, 2022 and libcamera, which can be easily used with a simple configuration. Efl: 2. 5mm; F. No: 2. 8; viewing angle: 62.
DORHEA #ad - High quality :good condition, great performance, with high quality, solid construction.222 fov infrared camera night vision, adjustable focus, very convenient to use at night, can be manually adjusted according to the distance of the object.
The camera is capable of 2592 x 1944 pixel static images and also supports 1080 p @ 30 fps, 720 p @ 60 fps and 640 x480 p 60/90 video recording.
Arducam #ad - Support raspberry pi zero & w, 3 b+, pi 3, Pi 4, Pi B/2B/B/B+/A. All-day image: built-in motorized ir-cut filter, switched in and out automatically based on light condition only visible light during the daylight and infrared sensitivity during the night with IR LEDs on.
Multiple camera cables: 3. 3ft 1m and 5. 9in 15cm 15 pin cables for model a and b, 5. 9in 15cm 15 pin to 22 pin cable for pi zero & w, you can change the cable for different model or usage; Acrylic Holder: Customized designed for this IR-CUT camera board and IR LEDs, make the camera stand or be mounted somewhere you like.
Resolution: 2592*1944, 60fps@720p, more than hd 1080p pixels; High Frame Rate: 30fps@1080P, 90fps@480p. Sharp image: adopts 5mp ov5647 sensor, max. Typical usage scenarios: 130 degree d wide angle lens and better low light performance make this camera be used widely for monitoring Octoprint 3D Printer, Home security and surveillance, motion detection, time-lapse photography and other Raspberry Pi camera projects.
Aokin #ad - The camera module board itself is tiny, making it perfect for mobile or other applications where size and weight are important. The camera is supported in the latest version of raspbian, Zero, 3B+, B+, Fully compatible with Raspberry Pi A, B, 2, the Raspberry Pi's preferred operating system.
Automatic ir-cut camera -- it's built-in ir-CUT camera, automatically switch day and night mode for better and clearer image during the day and night. Camera module for raspberry pi, 3, zero w. In terms of still images, the camera is capable of 2592 x 1944 pixel static images, 720p @ 60fps and 640x480p 60/90 video recording.
High-definition video camera, and also supports 1080p @ 30fps, the sensor itself has a native resolution of 5 megapixel, and has a fixed focus lens onboard. For raspberry pi camera is really good for learning program, monitor real-time experiment and video recording for pi enthusiast and beginner. Also suitable for Board. The csi bus is capable of extremely high data rates, and it exclusively carries pixel data to the BCM2835 processor.
1. Longruner
#adIR-Cut Video Camera 1080p HD Webcam 5MP OV5647 Sensor for Raspberry Pi RPi 4 3 B B+ 2B 3A+ 2 1 Zero W by Longruner, for Raspberry pi Camera Day & Night Vision
#adCsi interface - this pi camera module uses the dedicated CSI interface, via the CSI bus, A higher bandwidth Link which carries 5 megapixels data from the camera back to the processor.
More information #ad
All-day image - it's built-in ir-cut camera, automatically switches day and night mode for better and clearer image. Strong customer service team - as long as you have any questions about the product, we will solve your problem immediately when we receive your email. This can avoid image color cast, which is easier for beginners to use.| Brand | Longruner #ad |
| Manufacturer | Longruner #ad |
| Part Number | LC26-1-US |
| Model | LC26-1-US |
| Warranty | 1 year warranty |
More information #ad
2. HiLetgo
#adHiLetgo Raspberry Pi Camera 5MP OV5647 Adjustable-Focus Webcam Night Vision Camera Module Video 1080p for Raspberry-pi 2 Raspberry-pi 3 Model B Model B+ with Case
#adMore information #ad
Supports connecting infrared led and/or fill flash LED. Diagonal : 75. 7 degree; sensor best resolution : 1080p.| Brand | HiLetgo #ad |
| Manufacturer | HiLetgo #ad |
More information #ad
3. Weewooday
#ad2 Sets for Raspberry PI Camera 1080P Webcam 5MP OV5647 Sensor Day and Night Vision IR-Cut Video Camera Focus Adjustment for Raspberry Pi RPi 4 3 B B+ 2B 3A+ 2 1 Camera
#adMore information #ad
Ir-cut camera: the camera module has day mode and night mode, it can switch automatically between the 2 modes according to the change of light, which helps you to avoide image deviation and get clearer images during the day and night. Compatibility: these infrared night vision camera modules are compatible with Raspberry Pi 4/ 3/ 2/ 1 model B/ B +/ a + except Pi Zero/ Zero W. Nice performance: the ir-cut video camera not only supports shooting 2592 x 1944 pixel static image but also supports recording 1080p@30fps, 720p@60fps and 640 x 480p 60/90 video; Featuring with 1080P 5MP OV5647 webcam sensor, 5 megapixels and adjustable focal length.
| Brand | Weewooday #ad |
| Manufacturer | Weewooday #ad |
| Part Number | Weewooday-11849 |
More information #ad
4. Arducam
#adLinux, Arducam 1080P Day & Night Vision USB Camera for Computer, 2MP Automatic IR-Cut Switching All-Day Image USB2.0 Webcam Board with IR LEDs for Windows, Android and Mac OS
#adHigh frame rates: mjpg 30fps@1080p; yuy2 30fps@640x 480; High speed USB 2. 0 interface. Day/night vision: ir-cut filter switched in and out automatically based on light condition only visible light during the daylight and infrared sensitivity during the night with 850 IR LEDs on.
More information #ad
Resolution: 1920*1080 Applications: this mini 38mmx38mm camera board can be installed in most hidden and narrow position for a home surveillance system, wildlife photography, dashcam, baby camera, etc.| Brand | Arducam #ad |
| Manufacturer | Arducam #ad |
More information #ad
5. CUQI
#adDIY, Infrared Night Vision IR Camera with Acrylic Holder Case, 3D Printer, Suit for Home Security Monitors, Adjustable-Focus Webcam for Pi 4/Pi 3 B+/Pi 3, for Raspberry Pi
#adWidely application: recommend this camera can be used for security monitors, drone operation, DIY experiments etc, 3D Printer, robot, and even those wanting to get into stop motion productions. Camera specifications:the camera is capable of 2592 x 1944 pixel static images, 720 p / 60 fps and 640 x480 p 60/90 video recording, 70 ° diagonal, and also supports 1080 p / 30 fps, with 5MP OV5647 1080p webcam sensor, with HD Resolution and quality image.
More information #ad
Simple assembly : the unit is very easy to assemble and unload plus it comes with the tools, There are two holes in the bottom of the bracket for easy attachment to the table or to the wall. Note:if it is used during the day, the color of the picture taken by the camera is pink or reddish, which is normal, And You can try to turn off or remove the infrared LED light. Come with 3pcs heat sink, please tear off the heat sink and stick it, If the camera working is unstable or the camera is overheated, which it has great efficient heat dissipation.
| Brand | CUQI #ad |
| Manufacturer | CUQI #ad |
| Height | 0.12 Inches |
| Length | 0.35 Inches |
| Width | 0.2 Inches |
| Part Number | SB-122 |
More information #ad
6. DORHEA
#adDORHEA Raspberry Pi 4 Camera Module Automatic IR-Cut Sensor Day/Night Vision Video Webcam HD 5MP 1080P OV5647 Adjustable Focus with IR Sensor LED Light for Raspberry Pi 3 B+ 4B 2 Model B/B+ / A/A+
#adCamera specifications:this pi camera is capable of 2592 x 1944 pixel static images, 720 p @ 60 fps and 640 x480 p 60/90 video recording, and also supports 1080 p @ 30 fps, with 5MP OV5647 1080p webcam sensor.
More information #ad
Ir-cut camera : it's built-in ir-cut camera, automatically switch day and night mode for better and clearer image during the day and night. High quality : 100% brand new and in good condition, with high quality, great performance, solid construction. Compatible with : raspberry pi camera module kit compatible with Raspberry Pi model B / 2 / B+ / 4 / 3 / A+ / 1.| Brand | DORHEA #ad |
| Manufacturer | DORHEA #ad |
| Part Number | CL-5610 |
| Model | Raspberry pi5MP |
More information #ad
7. Arducam
#ad8MP IMX219 RPi-CAM-V2 Night Vision for Raspberry Pi 4B, 2B, 3B, Arducam Raspberry Pi Noir Camera Module, 3B+, Pi Zero & W
#adPlease note: this camera module is only supported with the latest Raspberry Pi OS Bullseye released on January 18, not with the previous Raspberry Pi OS Legacy. Please note: this camera module is only supported with the latest raspberry Pi OS Bullseye released on January 18, 2022 and libcamera, raspistill and buster.
More information #ad
Easy to setup: the package comes with a 15cm and 50cm 15pin fpc cable for pi 1-4b, and a 15cm 15-22pin FPC cable for Raspberry Pi Zero and Zero 2W. Before you use it, not with the previous Raspberry Pi OS Legacy, please follow the instructions to configure it. Simply connect the raspberry pi board and camera with the FPC cable and you can easily use this 8MP high-quality camera. Wide compatibility: the pinoir camera is compatible with all raspberry pi series boards, 2022 and libcamera, which can be easily used with a simple configuration. Efl: 2. 5mm; F. No: 2. 8; viewing angle: 62.
| Brand | Arducam #ad |
| Manufacturer | Arducam #ad |
| Warranty | 6 Months |
More information #ad
8. DORHEA
#adDORHEA for Raspberry Pi 4 B Camera Webcam 222 FoV Fisheye Wide Angle Camera Night Vision 5 Megapixel 1080p OV5647 Camera Video Module for Raspberry Pi Model 3 A/B/B+, Pi 2 and Raspberry Pi 3,3 B+
#adThe camera is capable of 2592 x 1944 pixel static images and also supports 1080 p @ 30 fps, 720 p @ 60 fps and 640 x480 p 60/90 video recording.
More information #ad
With 5mp ov5647 webcam sensor, 222 degree FOV, the vision is extremely open. This is a fisheye wide angle 222 degrees camera for raspberry pi 2 Raspberry pi 4B 3B and 3B+, AR, aerial photography, indoor and outdoor monitoring, applicable occasions: VR, real-time photography of the car, photographing and video recording.| Brand | DORHEA #ad |
| Manufacturer | DORHEA #ad |
| Part Number | 15677-1 |
| Model | 8541707709 |
More information #ad
9. Arducam
#adArducam Day and Night Vision for Raspberry Pi Camera with Holder, 5MP OV5647, Wide Angle Automatic IR-Cut Switching with IR LEDs
#adMultiple camera cables: 3. 3ft 1m and 5. 9in 15cm 15 pin cables for model a and b, 5. 9in 15cm 15 pin to 22 pin cable for pi zero & w, you can change the cable for different model or usage; Acrylic Holder: Customized designed for this IR-CUT camera board and IR LEDs, make the camera stand or be mounted somewhere you like.
More information #ad
Support all raspberry pi models: work on raspicam commands and Python scripts. Resolution: 2592*1944, 60fps@720p, more than hd 1080p pixels; High Frame Rate: 30fps@1080P, 90fps@480p. Sharp image: adopts 5mp ov5647 sensor, max. Typical usage scenarios: 130 degree d wide angle lens and better low light performance make this camera be used widely for monitoring Octoprint 3D Printer, Home security and surveillance, motion detection, time-lapse photography and other Raspberry Pi camera projects.
| Brand | Arducam #ad |
| Manufacturer | Arducam #ad |
| Part Number | B003505 |
More information #ad
10. Aokin
#adFor Raspberry Pi 3 Model B+ Camera Module Automatic IR-Cut Switching Day/Night Vision Video Webcam Adjustable Focus 5MP OV5647 Sensor 1080p HD for Raspberry Pi 2/3 Model B Model A A+ Zero/Zero W
#adAutomatic ir-cut camera -- it's built-in ir-CUT camera, automatically switch day and night mode for better and clearer image during the day and night. Camera module for raspberry pi, 3, zero w. In terms of still images, the camera is capable of 2592 x 1944 pixel static images, 720p @ 60fps and 640x480p 60/90 video recording.
More information #ad
The module attaches to for raspberry pi, by way of a 15 pin ribbon cable, to the dedicated 15-pin MIPI Camera Serial Interface CSI, which was designed especially for interfacing to cameras. High-definition video camera, and also supports 1080p @ 30fps, the sensor itself has a native resolution of 5 megapixel, and has a fixed focus lens onboard. For raspberry pi camera is really good for learning program, monitor real-time experiment and video recording for pi enthusiast and beginner. Also suitable for Board. The csi bus is capable of extremely high data rates, and it exclusively carries pixel data to the BCM2835 processor.
| Brand | Aokin #ad |
| Manufacturer | Aokin #ad |
| Part Number | 16018 |
| Model | 16018 |
More information #ad
