Top 10 NFC Reader Raspberry Pi – Single Board Computers

As an Amazon Associate I earn from qualifying purchases.

1. SunFounder

 #ad

SunFounder Reader Module Kit Mifare RC522 Reader Module with S50 White Card and Key Ring Compatible with Arduino Raspberry Pi

#ad
SunFounder #ad - The rf ic card module design the circuit of card read by using the original Philips MFRC522 chip. Applicable for the user who need to design or manufacture the RF card terminal. The module can be directly loaded into the various reader molds. Module interface: spi， Data transfer rate: Maximum 10Mbit/s. Easy to use, with pin header. Power voltage : 3. 3v, operating frequency: 13. 56mhz.
BrandSunFounder #ad
ManufacturerSunFounder #ad
Part NumberRC522 Reader Module
ModelNA

2. HiLetgo

 #ad

HiLetgo PN532 NFC NXP RFID Module V3 Kit Near Field Communication Reader Module Kit I2C SPI HSU with S50 White Card Key Card for Arduino Raspberry Pi DIY Smart Phone Android Phone

#ad
HiLetgo #ad - Rfid reader/writer supports: mifare 1k, iso/iec 14443-4 cards such as cd97bx, cd light, ultralight, P5CN072 SMX, and DesFire cards, Innovision Jewel cards such as IRT5001 card, desfire, 4k, FeliCa cards such as RCS_860 and RCS_854. Support i2c, spi and hsu high speed UART, easy to change among these modes. On-board level shifter, standard 5v ttl for I2C and UART, 3. 3v ttl spi. Arduino raspberry pi compatible, Small Size and easy to embed into your project. Support nfc rfid reading and writing, P2P communication with peers.
BrandHiLetgo #ad
ManufacturerHiLetgo #ad
Part Number3-01-1147
Model3-01-1147

3. Teyleten Robot

 #ad

Teyleten Robot PN532 V2.0 NXP NFC RFID Module Writer Reader Near Field Communication Module Kit I2C SPI HSU 13.56MHz for Arduino Raspberry Pi Android

#ad
Teyleten Robot #ad - Pn532 v2. 0 nxp nfc rfid module writer reader near field communication Module Kit I2C SPI HSU 13. 56mhz for arduino Raspberry Pi Android.
BrandTeyleten Robot #ad
ManufacturerTeyleten Robot #ad
Height0.2 Inches
Length2.36 Inches
Width1.5 Inches

4. CW-RPi

 #ad

I2C / SPI / UART, XYGStudy PN532 NFC HAT for Raspberry Pi, Applications for Payment System and Bluetooth and WiFi Devices Chaining and Smart Phone NFC App etc

#ad
CW-RPi #ad - Standard raspberry pi 40pin GPIO extension header, supports Raspberry Pi series boards. It is widely used in applications such as access control system, smart tickets, meal card, etc.

Based on the popular nfc controller pn532 with multi interface options, this HAT will easily enable NFC function for your Raspberry Pi. It supports three communication interfaces: I2C, SPI, and UART. This is a raspberry pi nfc hat based on pn532 operating in the 13. 56mhz frequency range. Pn532 nfc hat for raspberry pi, i2c / SPI / UART. Nfc near field communication is a wireless technology allows contactless point-to-point data communication between devices within a short distance of 10 cm.
BrandCW-RPi #ad
ManufacturerCW-RPi #ad

5. Songhe

 #ad

Songhe PN532 NXP NFC RFID Module V3 Kit Writer Reader Near Field Communication Module Kit I2C SPI HSU with S50 CUID White Card Key Card for Arduino Raspberry Pi Android Black Pin Header

#ad
Songhe #ad - Support nfc rfid reading and writing, P2P communication with peers. Rfid reader/writer supports: mifare 1k, 4k, cd light, innovision jewel cards such as irt5001 card, and desfire cards, Desfire, ultralight, ISO/IEC 14443-4 cards such as CD97BX, P5CN072 SMX, FeliCa cards such as RCS_860 and RCS_854. Support i2c, spi and hsu high speed UART, easy to change among these modes. Arduino raspberry pi compatible, Small Size and easy to embed into your project. On-board level shifter, standard 5v ttl for I2C and UART, 3. 3v ttl spi. With cuid card and cuid key ring, M1 white card and M1 key ring.
BrandSonghe #ad
ManufacturerSonghe #ad
Height0.12 Inches
Length0 Inches
Width0 Inches
Part NumberH23
ModelPN532
Warrantyno

6. Shutao

 #ad

5PCS PN532 NFC NXP RFID Module V3 User Kit Near Field Communication Reader Writer Module Kit I2C SPI HSU with S50 White Card Key Card for Raspberry Pi DIY Smart Phone

#ad
Shutao #ad - On-board level shifter, standard 5v ttl for I2C and UART, 3. 3v ttl spi. Exchange data with other NFC devices such as smartphone. Typical operating distance have been updated to 5cm~7cm reading distance, work in NFC Mode or RFID reader/writer mode. Work as rfid reader/writer, work as 1443-A card or a virtual card. Pn532 gilt pcb and small dimension and easy to embed into your project, support I2C. Spi and hsu high speed UART, change between those modes.
BrandShutao #ad
ManufacturerShutao #ad
Part Number13364-1
Model13364-1

7. ACEIRMC

 #ad

ACEIRMC PN532 NFC NXP RFID Module V3 Kit Near Field Communication Reader Module Kit I2C SPI HSU with S50 White Card Key Card for Arduino Raspberry Pi DIY Smart Phone for Android Phone

#ad
ACEIRMC #ad - Support i2c, spi and hsu high speed UART, easy to change among these modes. Support nfc rfid reading and writing, P2P communication with peers. Rfid reader/writer supports: mifare 1k, and desfire cards, ultralight, iso/iec 14443-4 cards such as CD97BX, Desfire, 4k, innovision jewel cards such as irt5001 card, CD light, p5cn072 smx, FeliCa cards such as RCS_860 and RCS_854. On-board level shifter, standard 5v ttl for I2C and UART, 3. 3v ttl spi. Compatible for arduino Raspberry Pi compatible, Small Size and easy to embed into your project.
BrandACEIRMC #ad
ManufacturerOrganizer #ad
Part Number16257

8. AITIAO

 #ad

AITIAO 3Pcs PN532 NFC NXP RFID Module V3 Kit Near Field Communication Reader Module Kit I2C SPI HSU with S50 White Card Key Card for Raspberry Pi DIY Smart Phone

#ad
AITIAO #ad - Small size and easy to embed into your project. Package include: you will receive 3pcs pn532 nfc nxp rfid module v3 Kit. Support nfc rfid reading and writing, p2p communication with peers; Support I2C, SPI and HSU High Speed UART, easy to change among these modes.

Rfid reader/writer supports: mifare 1k, cd light, ultralight, iso/iec 14443-4 cards such as cd97bx, innovision Jewel cards such as IRT5001 card, P5CN072 SMX, and desfire cards, desfire, 4k, FeliCa cards such as RCS_860 and RCS_854. On-board level shifter, standard 5v ttl for I2C and UART, 3. 3v ttl spi. If you have any questions about the V3 Kit, please feel free to contact us, we will provide you with a satisfactory solution.
BrandAITIAO #ad
ManufacturerAITIAO #ad
Warranty1

9. Stemedu

 #ad

Stemedu RC522 RFID Reader Writer Module RF IC Card Sensor with S50 White Card + Writable Key Ring for Arduino Raspberry Pi Nano NodeMCU Pack of 2sets

#ad
Stemedu #ad - Rfid rc522 module is a better choice for the development of smart meters and portable handheld devices. Low voltage, low cost, small size contactless card reader MF RC522 chip. Mfrc522 supports mifare series higher-speed contactless communication, bidirectional data transmission rate up to 424kbit/s. If any question, please click “stemedu”you can find "Sold by Stemedu" under Buy Now button to“Ask a question”in the new page. Mf rc522 is a high-integration card reader chip used in 13. 56mhz contactless communication.
BrandStemedu #ad
ManufacturerStemedu #ad
Part NumberST0565X2+ST0036

10. DIYables

 #ad

DIYables RC522 RFID Reader and RFID Card for Arduino, ESP32, Raspberry Pi, ESP8266

#ad
DIYables #ad - Interface: SPI. Operating frequency: 13. 56mhz. Original philips MFRC522 chip. 1 x rfid reader and 3 x rfid tags one S50 white card + two key rings. Works with arduino, esP32, esp8266, Raspberry Pi.
BrandDIYables #ad
ManufacturerDIYables #ad
Part NumberDIY-RFID-KIT-13

Tags: