As an Amazon Associate I earn from qualifying purchases.
GeeekPi #ad - Super cool fan background light Multicolor. Ice tower structure;easy to setup; raspberry Pi 4 Case with ICE Tower Fan: B07ZCX5KG6. 5mm copper tube;Super heat dissipation. Rated power 04w @5v, 008a;dc 5v power in Can be powered by the Raspberry Pi.
GeeekPi #ad - The fan on super ice tower cooler upgraded to pwm rgb fan. Tower structure, 5mm copper tube, 7 blades powerful fan, all the above combinations make this super radiator for Raspberry Pi. It can display the running status of raspberry pi or ups Plus through programming, such as Raspberry Pi’s IP address, disk utilization, CPU temperature, CUP load, memory status and other system information.
Support raspberry pi 4 model b only; support OLED display, UPS Plus integration, ICE Tower Cooler integration. The 096 inch oled screen was already mounted on the case.
The ups plus hat will charge the batteries while providing power output at the same time from an external power source and it can automatically switch to batteries output when external power supply is unavailable, keeping the system running trouble-free. In the case of overclocking, multi-layer heat sinks, it can reduce the temperature of the Raspberry Pi from 80℃ to 40℃. It also can power raspberry Pi via Pogo Pins without using any GPIO resources.
GeeekPi #ad - Super cool fan background light Multicolor. Rated power 04w @5v, 008a. 5mm copper tube;Super heat dissipation. Dc 5v power in can be powered by the Raspberry Pi. Ice tower Structure;Easy to setup.
GeeekPi #ad - Only support Raspberry Pi 4B. This is an ultra-Thin ice Tower Cooler. Note:raspberry pi board is not included! Support fan speed regultion. Package includes:1 x ultra thin ice tower Cooler, 1 x Screw driver, 4 x Screws, 4 x Thermal Pad.
SunFounder #ad - Silent rgb led fan - speed: 3500rpm; air flow: 2. 46cfm; noise level: 22. 32dba; rated Power: 04w @5v, 008a, quiet better. Sunfounder icecube- compatible with raspberry pi 4 B and Raspberry Pi 3 B+, easy to assemble, plug and play, no drive or software needed.
Ice tower structure - 28 aluminium Fins and 5mm Copper Pipe provide effectively excellent heat dissipation.
GeeekPi #ad - Sata ssd solid-state drive. Package includes: 1 x abs mini tower case, 1 x gpio edge expansion board, 2 x acrylic side panel, 1 x m.2 sata ssd shield, 1 x 096inch oled display already mounted on the case, 1 x ice-Tower CPU Cooling Fan, 1 x Assembly manualNote: Raspberry Pi 4B is Not included in the package.
The case is made of abs material, This kit turns your Raspberry Pi into a mobile mini-host. This raspberry pi mini tower nas kit contains an m. 2 sata ssd expansion board which can expand the mass storage for your Raspberry Pi.
Please purchase M. 2 sata ssd 2280 mass storage device, it dose not support nvme ssd!!! note: the rgb light on fan and mood light will not light up unless installed driver, and oled will not display any information untill you have enabled it !!! Please read the manual carefully and follow the steps to enable it. Please purchase M. 2 sata ssd 2280 mass storage device, it dose NOT support NVME SSD!!! M. 2 sata ssd 2280/2260/2240 mass storage adapter board, supports up to 2TB M2.
GeeekPi #ad - M. 2 sata ssd 2280/2260/2240 mass storage adapter board, supports up to 2TB M2. Note: the rgb light on fan and mood light will not light up unless installed driver, and oled will not display any information untill you have enabled it !!! Please read the manual carefully and follow the steps to enable it.
Please purchase M. 2 sata ssd 2280 mass storage device, it dose NOT support NVME SSD!!! The 096 inch oled screen was already mounted on the case.
2 sata ssd shield, 1 x QC 3. 0 power supply, 1 x assembly manualNote: Raspberry Pi 4B is Not included in the package. Sata ssd solid-state drive. The case is made of abs material, This kit turns your Raspberry Pi into a mobile mini-host.
GeeekPi #ad - With 096” oled screen display – the screen was installed with screen holder on mini tower case. The screen holder is easy to assemble or disassemble and the interior of the case includes a design for arranging cables, Network Card Traffic and other system information. The screen driver board contains RGB three-color programmable LED ambient light, the contents shown on screen can be varied.
Package includes: 1 x abs mini tower case, 1 x icE Tower Cooler, 1x GPIO Edge Extention, 1x QC3.0 power supply, 1 x 096 inch oled display already mounted on the case, 1x Assembly Manual Note: Raspberry Pi 4B is Not included in the package.
It can display raspberry pi’s IP address, Memory Status, which is convenient for arranging cables. Compatibility – only compatible with raspberry pi 4 model b. Access to all ports – this mini tower case is mainly made of abs material and the two sides is made of transparent acrylic material.
Pibiger #ad - Powerful cooling blades fan: rated power 04w @5v, 008a; dc 5v power in, 6000rpm, help to blow away all heat from CPU through the radiator, include four led fan background blue lights.
Packing list: tower structure heatsink kit x1, blades Fan x1, Screws Bag x1, Thermal Tape x2, Screm Driver x1, steel mounting fixer x2, User manual x1. Plug and play, no drive or software needed, easy to install, works quiet and stable.
GeeekPi #ad - Raspberry pi low-profile cpu cooler kit for raspberry Pi 4 Model B;Black Version, please refer to ASIN: B08CVDRCKT. Metal case features:it not only provides good protection to your Raspberry Pi and also offering excelent heat dissipation.
Only case, please refer to ASIN: B085HFTMB1. 5mm copper tube;super heat dissipation;Plug and play;Rated power 04w @5v, 008a.
1. GeeekPi
#adRGB Cooling Fan with Raspberry Pi Heatsink for Raspberry Pi 4 Model B & Raspberry Pi 3B+ & Raspberry Pi 3 Model B, GeeekPi Raspberry Pi Cooling Fan, Raspberry Pi ICE Tower Cooler
#adMore information #ad
| Brand | GeeekPi #ad |
| Manufacturer | GeeekPi #ad |
| Part Number | EP-0107 |
| Model | UYH6 |
More information #ad
2. GeeekPi
#ad0.96 inch OLED Display, GPIO 1 to 2 Expansion Board for Raspberry Pi 4 Model B, Raspberry Pi ICE Tower Cooler with PWM RGB Fan, GeeekPi Mini Tower UPS Kit, Raspberry Pi UPS Plus Hat
#adSupport raspberry pi 4 model b only; support OLED display, UPS Plus integration, ICE Tower Cooler integration. The 096 inch oled screen was already mounted on the case.
More information #ad
Package includes: 1 x abs mini tower case, 2 x acrylic side panel, 1 x 096 inch oled displayalready mounted on the case, 1x gpio edge extention, 1 x UPS Plus Hat, 1 x ICE Tower Cooler, 1x Assembly Manual Note: Raspberry Pi 4B is Not included in the package. The ups plus hat will charge the batteries while providing power output at the same time from an external power source and it can automatically switch to batteries output when external power supply is unavailable, keeping the system running trouble-free. In the case of overclocking, multi-layer heat sinks, it can reduce the temperature of the Raspberry Pi from 80℃ to 40℃. It also can power raspberry Pi via Pogo Pins without using any GPIO resources.
| Brand | GeeekPi #ad |
| Manufacturer | GeeekPi #ad |
More information #ad
3. GeeekPi
#adRGB Cooling Fan with Raspberry Pi Heatsink for Raspberry Pi 4 Model B & Raspberry Pi 3B+ & Raspberry Pi 3 Model B Black, Raspberry Pi ICE Tower Cooler, GeeekPi Raspberry Pi Cooling Fan
#adMore information #ad
| Brand | GeeekPi #ad |
| Manufacturer | GeeekPi #ad |
| Part Number | EP-0107 |
More information #ad
4. GeeekPi
#adGeeekPi Raspberry Pi 4 Fan, Raspberry Pi PWM Cooling Fan with Raspberry Pi Heatsink for Raspberry Pi 4 Model B Only, Raspberry Pi Ultra Thin ICE Tower Cooler
#adMore information #ad
| Brand | GeeekPi #ad |
| Manufacturer | GeeekPi #ad |
| Height | 1.02 Inches |
| Length | 1.57 Inches |
| Width | 1.57 Inches |
| Warranty | no |
More information #ad
5. SunFounder
#adQuiet Cooling Fan Radiator for Raspberry Pi 4 Model B 3B+, Cooling 4 Chips with RGB LED, SunFounder Raspberry Pi Cooling Fan, Raspberry Pi Heatsink, Raspberry Pi Ice Tower Cooler
#adIce tower structure - 28 aluminium Fins and 5mm Copper Pipe provide effectively excellent heat dissipation.
More information #ad
Cooling 4 chips - with a good cooling effect, the cooling base also covers the RAM, not just the CPU, LAN and USB chips. Super cooler - ambient temperature 25°c raspberry pi 4 model b 2gb version Idle Test: around 29°C; Full Load: less than 37°C; Overclock 2147 MHz : less than 46°C.| Brand | SunFounder #ad |
| Manufacturer | SunFounder #ad |
| Height | 1.97 Inches |
| Length | 4.33 Inches |
| Width | 2.95 Inches |
| Warranty | 1 Year |
More information #ad
6. GeeekPi
#adM.2 SATA SSD Expansion Board, Raspberry Pi ICE Tower Cooler with PWM RGB Fan, GeeekPi Raspberry Pi Mini Tower NAS Kit, GPIO 1 to 2 Expansion Board for Raspberry Pi 4 Model B
#adThe case is made of abs material, This kit turns your Raspberry Pi into a mobile mini-host. This raspberry pi mini tower nas kit contains an m. 2 sata ssd expansion board which can expand the mass storage for your Raspberry Pi.
More information #ad
Note: the rgb light on fan and mood light will not light up unless installed driver, and oled will not display any information untill you have enabled it !!! Please read the manual carefully and follow the steps to enable it. Please purchase M. 2 sata ssd 2280 mass storage device, it dose not support nvme ssd!!! note: the rgb light on fan and mood light will not light up unless installed driver, and oled will not display any information untill you have enabled it !!! Please read the manual carefully and follow the steps to enable it. Please purchase M. 2 sata ssd 2280 mass storage device, it dose NOT support NVME SSD!!! M. 2 sata ssd 2280/2260/2240 mass storage adapter board, supports up to 2TB M2.
| Brand | GeeekPi #ad |
| Manufacturer | GeeekPi #ad |
| Warranty | no |
More information #ad
7. GeeekPi
#adM.2 SATA SSD Expansion Board, GPIO 1 to 2 Expansion Board, Raspberry Pi ICE Tower Cooler with PWM RGB Fan, GeeekPi Raspberry Pi Mini Tower NAS Kit, 18W QC3.0 Power Supply for Raspberry Pi 4 Model B
#adPlease purchase M. 2 sata ssd 2280 mass storage device, it dose NOT support NVME SSD!!! The 096 inch oled screen was already mounted on the case.
More information #ad
28x64pixels, default I2C address: 0x3C. This raspberry pi mini tower nas kit contains an m. 2 sata ssd expansion board which can expand the mass storage for your Raspberry Pi. Package includes: 1 x abs mini tower case, 1 x 096inch oled display already mounted on the case, 2 x acrylic side panel, 1 x ICE-Tower CPU Cooling Fan, 1 x gpio edge expansion board, 1 x M.22 sata ssd shield, 1 x QC 3. 0 power supply, 1 x assembly manualNote: Raspberry Pi 4B is Not included in the package. Sata ssd solid-state drive. The case is made of abs material, This kit turns your Raspberry Pi into a mobile mini-host.
| Brand | GeeekPi #ad |
| Manufacturer | GeeekPi #ad |
| Weight | 0.79 Pounds |
| Part Number | K-0612-EU |
More information #ad
8. GeeekPi
#adGeeekPi Raspberry Pi Mini Tower Kit with QC3.0 Power Supply, Raspberry Pi 4 Case with ICE Tower Cooler, RGB Fan, GPIO Expansion Board for Raspberry Pi 4B, 0.96'' OLED Module, Raspberry Pi Heatsink
#adPackage includes: 1 x abs mini tower case, 1 x icE Tower Cooler, 1x GPIO Edge Extention, 1x QC3.0 power supply, 1 x 096 inch oled display already mounted on the case, 1x Assembly Manual Note: Raspberry Pi 4B is Not included in the package.
More information #ad
It’s access to usb-c power port, 2 USB 2. 0 ports, two micro hdMI ports, 2 USB 3. 0 ports, gigabit ethernet port, SD card slot, GPIO port. Ice tower cooler – the ice tower cooler includes a 40mm pwm fan. Note: the rgb lights on fan and mood lights on oled screen driver board will not light up unless installed driver, 2 x acrylic side panel, and oled will not display any information until you have enabled it! Please read the manual carefully and follow the steps to enable it. It can display raspberry pi’s IP address, Memory Status, which is convenient for arranging cables. Compatibility – only compatible with raspberry pi 4 model b. Access to all ports – this mini tower case is mainly made of abs material and the two sides is made of transparent acrylic material.
| Brand | GeeekPi #ad |
| Manufacturer | GeeekPi #ad |
| Weight | 0.94 Pounds |
More information #ad
9. Pibiger
#adPi 3B, Pibiger Raspberry Pi 4 Cooling Fan Ice Tower Cooler CPU Heatsink Kit for Raspberry Pi 4 Model B Compatible with Raspberry Pi 3B+
#adPacking list: tower structure heatsink kit x1, blades Fan x1, Screws Bag x1, Thermal Tape x2, Screm Driver x1, steel mounting fixer x2, User manual x1. Plug and play, no drive or software needed, easy to install, works quiet and stable.
More information #ad
Note: raspberry Pi Boards is NOT Included. Super heat dissipation: the ice tower heatsink cooler with fan is made for Raspberry Pi 4 and pi 3B+ pi 3B to keep CPU at about 40 degree when running with full power for a long time. Compact size: tower structure, 30mmx30mmx7mm cooling fan and multi-layer aluminum alloy heat dissipation scales, include 4mm copper tube, precise and efficient heat conduction system.| Brand | Pibiger #ad |
| Manufacturer | Pibiger #ad |
| Part Number | Ice-Tower-Fan-V1 |
| Warranty | 1 |
More information #ad
10. GeeekPi
#adRaspberry Pi 4B Case with Raspberry Pi Low-Profile CPU Cooler,Raspberry Pi Horizontal ICE Tower Cooler Silver, GeeekPi Raspberry Pi 4 Metal Case with Fan
#adOnly case, please refer to ASIN: B085HFTMB1. 5mm copper tube;super heat dissipation;Plug and play;Rated power 04w @5v, 008a.
More information #ad
Fan features: color led fan with automatic color change;single-stack tower-style heatsink;DC 5V Power in Can be powered by the Raspberry Pi;Only Fan, please refer to ASIN: B07ZV1LLWK. Package includes: 1 x metal case, 1x 40-pin gpio 1 to 2 expansion Board, 1 x ice tower cooler, 1 x Screwdriver, 1 x Instructions; Note: Raspberry Pi Board is Not Included.| Brand | GeeekPi #ad |
| Manufacturer | GeeekPi #ad |
| Part Number | K-0522 |
More information #ad
