As an Amazon Associate I earn from qualifying purchases.
nobrand #ad - Activated carbon filters can remove most harmful soldering fumes and help create a healthy working condition. How often should you need to replace carbon filters? Generally, it can be used for 4-6 months according to the usage.
QWORK #ad - 100% satisfied service: enjoy a smooth & frustration free experience with our 100% Satisfied Service in one Month. Can absorb toxic flux and lead, having good adsorption properties.
Fstop Labs #ad - Stay safe and stop sucking on toxic smoke fumes. 04 inch thick activated carbon filter absorbs and captures fumes from solder, chemicals, flux, gases and helps to prevent dissipation into the room.
MUIN #ad - Dimensions4. 7x4. 7x075 in | weight: 02 lb. Contian1 activated carbon filter and 3 Pre-filter. 3 stage filtrationincludes a fabric pre-filter, an activated carbon filter and a photocatalyst filter which absorbs and captures fumes from solder, flux, chemicals, gases and helps to reduce unwanted odors and smells in your working spaces.
FEITA #ad - How often should replace your carbon filter? Normally activated charcoal filters should last 3-4 months should replace a new filter. Feita extractor filter replacement activated fits for Hakko Corporation 493 and FA-400, Xytronic 426DLX and 456DLX and Aoyue 486.
Long service life. Easy to use. This smoke fume absorber filter can take the smoke away very well, thick well made filter, works well for your fume extractor, homemade DIY fan.
Antidious #ad - Universal : ideal for work with solder, flux, such as electronics, chemicals, craft jewelry and stained glass. Activated carbon filters : the highly efficient activated carbon filter is approximately 04 inches thick.
Protecting health: Capture and absorbs of fumes and harmful smoke, preventing health hazards. Made of features urethane foam and activated carbon.
KOTTO #ad - Us based customer support, 30 days full satisfaction no question asked return period. 4 non-slip heavy duty rubber feet anchors the unit to the ground.
Optimized 3000 rpm high suction fan is low noise and allows you to remove fumes 5-6 inches away. 04 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room.
FUMECLEAR #ad - Our fumeclear engineers are available 24/7 to provide problem-solving services. Great suction power—fc100a fume extractor has a much higher suction power than similar products, iron filings, powder, up to 200m³/h. And fc100a is also equipped with 10 pre-filters specifically designed to absorb large particles of dust.
Multiple filtration system 3 layers—the unique 3-layer filter design that can effectively filter out 99. 97% of harmful gases and tiny impurities. It has a maximum no-load power of 100W and is highly effective at filtering dust particles below 03 microns.
It can easily absorb all fine objects near the hood head, including exhaust gas, etc. It is expected to last for 3000 hours and does not need to be replaced until then. The purification efficiency far exceeds that of small fume smoker absorbers. Professional grade high iodine filter—fc100a main carbon filter is composed of high iodine activated carbon, which has better adsorption and purification effect than ordinary activated carbon and longer service life.
Toolour #ad - High efficiency solder fume extractor: the soldering process can produce harmful fumes that can affect our health. The replacement filters are easy to install. Our 12v solder smoke fan features a pure copper motor that provides powerful suction to draw in smoke and other harmful particles. The 5pcs easily replaceable filters give you good and timely smoke prevention filter supplements.
5pcs carbon filters: we offer 5pcs filters. Note: the best gas absorption range of the filter is within 5inches. Making it an ideal choice for those who want a smoke absorber that will last for years. The strong suction power ensures that even the smallest particles are captured and filtered out, so it won't disturb the user or others in the room.
This makes the solder fume extractor a cost-effective choice, as you won't need to replace the entire unit when the filters become dirty. Low noise smoke absorber: the solder smoke fan is designed to operate with low noise, the smoking instrument is highly effective at purifying the air and reducing harmful smoke. Despite its quiet operation, leaving the air clean and fresh. Upgrade casing design: the soldering fan casing is made of high-quality metal that is resistant to wear and tear, making it suitable for long-term use.
Valtcan #ad - 50mm diameter air inlet provides precise suction to work areas. Hose attachment kit and 4 additional prefilters included. Plugs into AC socket for power. Prefilter. Operational in standing or sitting mode for more direct smoke absorption from your workbench.
Fan removes solder smoke, soldering fumes, stain glass work, solder flux smoke on solder workstations, pyrography stations, nails, paint etc quick and efficiently with 3-stage filtration system.
97% 3. Made of esd electrostatic discharges safe material, lightweight and durable material. On/off button located on side of the smoke extractor fan. Low noise and high- efficient fan operates at acceptable db levels in workstations. Fume extration with brushless motor ensures high speed with low noise, stable performance and low power consumption. Active carcoal filter 2. 1.
1. nobrand
#adSmoke Fume Absorber Filter, Solder Extractor Filter Activated Carbon Replacement, Pack of 6
#adMore information #ad
Fits for smoke absorber such as 493, fa-400, 426DLX, 456DLX, 486. Each activated carbon filter dimention is 13cm*13cm*1cm5 1/8" * 5 1/8" * 3/8". Extractor filter only, not include smoke absorber! Please feel free to contact us if you have any questions, we will reply within 24 hrs.| Brand | nobrand #ad |
| Manufacturer | nobrand #ad |
| Part Number | 0200 |
| Model | 0200 |
More information #ad
2. QWORK
#ad5 Pack, Replacement Activated Carbon Filters for Solder Fume Extractor, QWORK Premium Fume Extractor Accessories, Compatible with Hakko/Xytronic/Aoyue Smoke Absorber
#adMore information #ad
Suitable for your fume extractor, homemade DIY fan. Etc. Includes 5 activated carbon filters, solder fan not included. Long service life, we recommend replacing each filter every 4 to 5 month depending on usage.| Brand | QWORK #ad |
| Manufacturer | QWORK #ad |
| Part Number | WD4669 |
| Model | WD4669 |
More information #ad
3. Fstop Labs
#adFume Extractor Filters Solder Extractor Filter for Solder Smoke Absorber, Refills, KOTTO 5 Pack Set 0.4 Inch Thick Activated Carbon Filter for Solder Smoke Fume Ventilation Fumes Absorber
#adMore information #ad
Better than the rest! Us based customer support, 30 days full satisfaction no question asked return period. 5 pack set 04 inch thick activated carbon filter for Solder Smoker Absorber.| Brand | Fstop Labs #ad |
| Manufacturer | Fstop Labs #ad |
| Weight | 0.13 pounds |
| Part Number | 5FL_FAN_SLD |
| Model | Carbon Filter |
More information #ad
4. MUIN
#adSolder Fume Extractor Filter, MUIN 3 Stage Filtration Soldering Smoke Filter for Solder Smoke Absorber Remover,Including 1 Activated Carbon filter and 3 Pre-filter
#adMore information #ad
Solder fume extractor filterhigh-efficient soldering Smoke Filter for Solder Smoke Absorber. Guaranteed24-hour customer support and 30-Day Money Back Guaranteed.| Brand | MUIN #ad |
| Manufacturer | MUIN #ad |
| Height | 0.75 inches |
| Length | 4.7 inches |
| Weight | 0.1 Kilograms |
| Width | 4.7 inches |
| Part Number | HJ-1238 |
| Model | HJ-1238 |
More information #ad
5. FEITA
#ad5Pcs/Pack, FEITA Smoke Fume Absorber Filter for Hakko/Xytronic/Aoyue Smoke Absorber 5 1/8" x 5 1/8" x 3/8”, Solder Extractor Filter Activated Carbon Filter Replacement
#adLong service life. Easy to use. This smoke fume absorber filter can take the smoke away very well, thick well made filter, works well for your fume extractor, homemade DIY fan.
More information #ad
Etc. Feita activated carbon filter of smoke filter can absorb toxic flux and lead. Extractor filter only, not include smoke absorber! Guarantee and Warranty: any quality issues, just contact us for refund or replacement. Having good adsorption properties.| Brand | FEITA #ad |
| Manufacturer | FEITA INTERNATIONAL LIMITED #ad |
| Height | 1 inches |
| Length | 8 inches |
| Width | 5 inches |
| Part Number | FT-SEF05 |
| Model | FT-SEF05 |
More information #ad
6. Antidious
#adAntidious 5 Pack Activated Carbon Filters for Fume Extractor Solder Smoke Absorber Portable Filter, Fume Prevention Remover, Soldering DIY Fan Extraction Equipment for Brazing Welding Soldering
#adProtecting health: Capture and absorbs of fumes and harmful smoke, preventing health hazards. Made of features urethane foam and activated carbon.
More information #ad
Fume extractor : the highly efficient Activated carbon filter attached to the powerful fan absorbs 80% of the harmful fumes and ensures a breathable environment in your workspace. Easy to replace : the typical lifespan of activated charcoal filters is 3 to 4 months, after which time they should be replaced.| Brand | Antidious #ad |
| Manufacturer | Antidious #ad |
| Part Number | 0 |
More information #ad
7. KOTTO
#adKOTTO Solder Smoke Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan for Soldering Station Yellow
#adOptimized 3000 rpm high suction fan is low noise and allows you to remove fumes 5-6 inches away. 04 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room.
More information #ad
Solder fume extractor/smoke trap/smoke eater/Smoke Filter/Solder Sucker Prevention Absorber DIY Working Extractor Fan for Solder Station. Working temperature: -20℃～60℃, 30W 50 / 60Hz. Handy carrying handle allows you to move the unit easily. Easy to replace filter, power consumption: 120v, includes one smoke trap replacement filter.| Brand | KOTTO #ad |
| Manufacturer | Fstop Labs #ad |
| Part Number | WV-05SN-Z9HB |
| Model | Yellow |
More information #ad
8. FUMECLEAR
#adPowerful 100W Suction, Low-Noise, 3-Stage Filtration System with 12 Filters for Laser Welding Smoke Absorption and Desktop Soldering, FumeClear Solder Fume Extractor
#adMultiple filtration system 3 layers—the unique 3-layer filter design that can effectively filter out 99. 97% of harmful gases and tiny impurities. It has a maximum no-load power of 100W and is highly effective at filtering dust particles below 03 microns.
More information #ad
No after-sales worries—all of our products are ce and fcc certified. Additionally, you can return or exchange the product at any time in case of any quality problems. Great value for money！. Keep your eyes and lungs free from pollution. It can easily absorb all fine objects near the hood head, including exhaust gas, etc. It is expected to last for 3000 hours and does not need to be replaced until then. The purification efficiency far exceeds that of small fume smoker absorbers. Professional grade high iodine filter—fc100a main carbon filter is composed of high iodine activated carbon, which has better adsorption and purification effect than ordinary activated carbon and longer service life.
| Brand | FUMECLEAR #ad |
| Manufacturer | Fumeclear #ad |
| Height | 10.8 inches |
| Length | 10.6 Inches |
| Weight | 21 pounds |
| Width | 8.7 inches |
| Part Number | FC-100A |
More information #ad
9. Toolour
#adSolder Smoke Absorber Fume Extractor Remover Smoke Prevention Absorber, 12V Soldering Working Fan with 5 Carbon Filters for Soldering Station Repairing Desoldering DIY
#ad5pcs carbon filters: we offer 5pcs filters. Note: the best gas absorption range of the filter is within 5inches. Making it an ideal choice for those who want a smoke absorber that will last for years. The strong suction power ensures that even the smallest particles are captured and filtered out, so it won't disturb the user or others in the room.
More information #ad
The motor has a high-speed rotation of 2800 rpm, which generates a strong airflow that helps to purify the air quickly. 100% satisfaction service: export products 100% quality inspection, please contact us in time, all customers support 3 months of unconditional exchange or return policy. This makes the solder fume extractor a cost-effective choice, as you won't need to replace the entire unit when the filters become dirty. Low noise smoke absorber: the solder smoke fan is designed to operate with low noise, the smoking instrument is highly effective at purifying the air and reducing harmful smoke. Despite its quiet operation, leaving the air clean and fresh. Upgrade casing design: the soldering fan casing is made of high-quality metal that is resistant to wear and tear, making it suitable for long-term use.
| Brand | Toolour #ad |
| Manufacturer | Toolour #ad |
| Model | SE120B-SolderSmoke Absorber |
More information #ad
10. Valtcan
#adValtcan Fume Extractor Filter Replacement Pack, Prefilter Carbon and HEPA 0.3 micron 99.97% filter
#adFan removes solder smoke, soldering fumes, stain glass work, solder flux smoke on solder workstations, pyrography stations, nails, paint etc quick and efficiently with 3-stage filtration system.
More information #ad
Articulated flex arm & nozzle hose attachments included. Variable speed dial for smoke fan. Hepa filter 03um particles 99. 97% 3. Made of esd electrostatic discharges safe material, lightweight and durable material. On/off button located on side of the smoke extractor fan. Low noise and high- efficient fan operates at acceptable db levels in workstations. Fume extration with brushless motor ensures high speed with low noise, stable performance and low power consumption. Active carcoal filter 2. 1.
| Brand | Valtcan #ad |
| Manufacturer | Valtcan #ad |
| Height | 6 inches |
| Length | 10 inches |
| Width | 9 inches |
| Part Number | Valt-88 |
| Model | 88-31 |
More information #ad
30-90% Disocunts Found!
We found that some of the products on this list are now discounted on Amazon! Do you want to see these products?
Disclaimer: We earn small fee from purchases made on Amazon.
