As an Amazon Associate I earn from qualifying purchases.
1. DEEP COOL #ad
DEEPCOOL FH-10 Integrated Fan Hub, Powering up to 10 Fans 3-pin Non-PWM or 4-pin PWM, Occupying only One 4-pin Motherboard Header #adDEEP COOL #ad
- If 3-pin non-pwm fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. Powered by a stable sata connection to the system PSU for up to 10 fans. They will run at FULL SPEED. Only speed of Fan 1 can be identified by the system.
Velcro and screw mountings applicable for the tower interiors. Capable of connecting to 10 PC fans simultaneously for cooling the computer system. That is, all pwm fans will run at the same DUTY RATIO. If 4-pin pwm fans are connected to this fan hub, duty ratio of all pwm fans can be adjusted at the same time.
|Brand||DEEP COOL #ad|
2. ThreeBulls #ad
ThreeBulls PWM Fan Hub, PC CPU Cooling 4 PIN/3PIN Fan Power Cable Hub Splitter Adapter Sleeved PWM Case Fan Splitter for 12V Desktop Computer Cooler Case Fans 1 to 5 Way 15.7 Inch #adThreeBulls #ad
- Excellent 4-pin pwm 1 to 5 splitter fan power supply extension cable for PC computer motherboard fans, make you easier diy PC computer case.
Easy to plug, the fan extension cable offers greater flexibility between Motherboard and CPU cooling fans. Black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean & tidy.
Widely compatible: the cable is one 4-pin female connector to 4-pin male connector, support 4-pin and 3-pin fans cable, the fan power cable compatible with 4 pin and 3 pin PC case fans. Package contents: 1 black 15. 7 inch 1-to-5 splitter fan power supply extension cables, male to female connector plug.
3. GELRHONR #ad
SATA 1 to 8 Way12V 3 PIN Cooling Fan Splitter Controller Hub 3 Pin PWM for PC Desktop Computer Motherboard12V 3-Pin, Chassis Fan Hub #adGELRHONR #ad
- 8 way without speed measurement and pwm function, start the fan at full speed LOW or low speed LOW, you can manually adjust the gear position, or turn off the fan. Suit for 12v 3pin fan 8 channels.
Using sata interface. Support the fan operation at the same time, solve the lack of motherboard interface, and focus on processing the fan wire. Sata cooling fan splitter suit for 12v 3pin fan 8 channels.
Using sATA interface. Support the fan operation at the same time, solve the lack of motherboard interface, and focus on processing the fan wire. Easy installation:it is very easy to setup.
It can be used to fix the hub in the chassis. Built-in double-sided adhesive: this compact HUB easily fits inside your pc case. Connect your rgb items to the hub, connect the included cable to any pin on the hub then connect the other end to any RGB header on your motherboard and lastly connect a SATA cable from your PSU to the hub to provide power.
4. DEEP COOL #ad
DeepCool Fan Hub Control 4PWM Fan Speed Supports Fan with 3Pin/4Pin Cooling FH-04 #adDEEP COOL #ad
- Support Cable management. Compatible with 3-pin/4-pin fans. Support PWM function. Double-sided adhesive Installation. 4-port fan hub.
|Brand||DEEP COOL #ad|
5. upHere #ad
UpHere 7-Port 4PIN SATA PWM 5V 3PIN ADDRESSABLE RGB Fan Hub/Splitter for 4-Pin & 3-Pin Case Fans in Black-P7PRGB #adupHere #ad
- The fan hub draw the pwm signal from motherboard and feedback fan speed to the motherboard and draw an ARGB signal from this cable only the speed of Fan 1 can be identified by the system. Each port has its own PWM function and the fan speed can be adjustedat the same time.
02. Uphere p7p fan hub provides individually addressable rgb lighting with software control for unique lighting effects and colors.
5v argb header compatible with asus aura, asRock RGB, GIGABYTE and MSI RGB. 05. Easy and quick installation with a compact Design, upHere P7P Fan hub allows you to easily attach on the back of the PC case using pre-installed double-sided tape.
04. Powered by system psu sata connection to ensure 12V stable power for up to 7 fans. 03. Capable of connecting to 7 pc fans simultaneously for cooling the computer system. 01. Uphere argb pwm fan hub - supports up to 7 fans （3pin/pwm 4pin/5v 3pin argb）, occupying only one 4-pin M/B FAN Header System Fan or CPU Fanand One 5V 3-pin ARGB Header.
6. EZDIY-FAB #ad
EZDIY-FAB 10-Port PWM Fan Hub/Splitter for 4-Pin & 3-Pin Fans, Only Use One MB Header #adEZDIY-FAB #ad
- Power up to 10 pc fans from a Single 4-Pin Motherboard PWM Fan Header. Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal.
In the hub interfaces, the white interface of fan1 is the cpU fan dedicated interface with speed detection function. They will run at FULL SPEED. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.
If 3-pin fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. Direct computer power supply to reduce the mainboard loading pressure, and PWM temperature control line separated from mainboard to achieve both of power supply and temperature control. There is eva double-sided adhesive in the package, which can be easily affixed to a flat place.
7. Toptekits #ad
2 Pack Toptekits Chassis Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Fan Hub SATA Controller,1 Female to 10 Male 4Pin Fan Hub Splitter Cable for 3Pin&4Pin PWM Cooling Fan #adToptekits #ad
- Eva double-sided adhesive can be used to fix the hub in the chassis. The orange interface is the dedicated interface for CPU fan, these black interface are conventional PWM fan interface.
Support pwM function fan automatic speed regulation. Widely used for pc computer water cooling system. Package includes: 1x toptekits 4pin interface 1 to 10 Way PCB Adapter, 1X Toptekits SATA interface 1 to 10 way PCB adapter.
Designed for 12v 4-pin fan, support simultaneous starting of 10 channel 4-Pin fans, solving the problem of shortage of motherboard. Ide molex 1 to 10 way cooling fan splitter hub. Toptekits computer/pc case fan controller power cable 1 Female to 10 Male 4Pin Fan Hub Splitter Cable for 3Pin&4Pin PWM Cooling Fan. Pwm interface is connected to CPU FAN interface on motherboard by PWM cable.
8. ZRM&E #ad
ZRM&E PC Fan Speed Controller 8 Way Cooling Fan Hub 3 Gear Speed IDE Molex 1 to 8 Multi Way Splitter 3-Pin Power Socket PCB Adapter #adZRM&E #ad
- Input: large 4 pin ide power supply interface port, connect to your PC computer. Output: 8 way fan interface ports, fits for 12V 3pin / 4pin cooling fan, can be used as speed controller or fan splitter hub.
Type: large 4 pin ide molex 1 to 8 Way Cooling Fan Splitter Hub. Installation: with thickened 3M glue on the PCB back, you can fix it on your PC case firmly. 3 level speed controller: Low Speed, High Speed, and Power OFF.
9. Greneric #ad
Cooler Master PWM HUB,6 Ports for Addressable RGB Lighting with PWM,1 to 6 Multi Way Magnetic backplane Splitter 5V/3PIN RGB Case Fan Hub Adapter PWM ARGB Addressble Fan #adGreneric #ad
- Built-in magnet: this compact HUB easily fits inside your case. It can attach to any metallic surface with built-in magnets. Cooler master 1 to 6 multi way splitter 5v/3pin rgb case Fan Hub Adapter PWM ARGB Addressble Fan Power interface SATA.
Multi connection: up to 6 sets of addressable RGB 3-pin headers and PWM headers to meet your needs of connecting more devices. Space saving: it will save your space effectively and make the cable management easier, and make the inside case neat and tidy. Sata power: even with full loaded, it still can maintain stable output.
10. XMSJSIY #ad
12V 4Pin PWM & 5V 3Pin ARGB with SATA 15Pin Power 2-in-1 Hub 6 Way Sync CPU Cooling Fan Addressable RGB Lighting PCB Splitter for Extended Motherboard Interface -Black #adXMSJSIY #ad
- Up to 6 sets of addressable rgb 5v 3pin plugs and pwm 12v 4pin plugs to meet your needs of connecting more devices. This cpu cooling sata hub is powered by sata 15pin, which can simultaneously supply power to the fan and 5V 3 pin ARGB products. This is argb pwm 2-in-1 6 way hub.
This type of fan can control a single lamp bead, and realize the effects of running water lamp, splicing and displaying text patterns through programming. The motherboard has no power supply burden and can maintain a stable output even at full load.
The pwm argb hub is equipped with two connecting cables. The red port on the hub is a professional port for the CPU fan. Mini and compact, makes cable management easier, and the inside of the chassis is tidy. The argb of this hub is 5v 3-pin.
Support simultaneous startup of 6 way fans, ARGB is all synced between all fans, one setting applies to all fans speed and color. The black hub is perfectly integrated with chassis. Both length of the wires is 53 cm. The adhesive on the back can be used to fix the hub in the chassis, which effectively saves your space, tool-free installation, and not easy to drop. Only compatible with 3pin 5v addressable RGB headers or controllers, don't connect to 12V RGB components, otherwise it might burn out.