As an Amazon Associate I earn from qualifying purchases.
1. Bora #ad
BORA NGX Twin Rail Rip Guide for Circular Saws, Crosscut sled | Circular Saw Guide Rail System to Make Straight Repeatable Rip Cuts up to 24" on sheet goods | 546250 #adBora #ad
- Allowing for precise, repeatable cuts. The lightweight and durable aluminum twin rail frame design of this circular saw guide make it a must-have accessory for any woodworking enthusiast or professional.
Designed to fit most circular saws, this skill saw guide features two parallel aluminum guide rails that keep the saw on track and cuts up to 24”.
The easy-to-read measuring scale ensures accurate cuts without the need for additional measuring tools. The bora ngx twin rail rip guide is a high-quality circular saw guide that ensures accurate and precise cuts every time. The rip fence can be easily adjusted with the built in micro-adjust to the desired width.
2. Bora #ad
Straight Cut Guide for Circular Saws, Easy to Use, 544050, Great for Cross-Cutting Plywood Sheets and Routing Dados, BORA 50” NGX Clamp Edge #adBora #ad
- For big projects, routers, easily increase the length up to 100 in. Extreme durability: made of heavy-gauge, extruded aluminum, it is rigid enough to resist bowing and hold a straight edge, and durable enough to withstand repeated use.
Circular saw guide for large sheets: the bora Clamp Edge is an ideal accessory for accurately cutting wide boards and pieces of plywood that are too big for a table saw.
Use with any circular saw: this guide is compatible with any brand of circular saw, not just Bora Tools. Clamps firmly: this straight edge guide has a wide rubberized clamp face to ensure a tight non-slip grip that won’t leave indentations and is easily adjustable to meet the length of your project. Use it with circular saws, and jigsaws. By adding the bora NGX 50-inch aluminum extension.
3. Bora #ad
BORA 100" NGX Clamp Edge, Straight Cut Guide for Circular Saws, Includes 50-Inch Clamp Edge & 50-Inch Extension for 100-Inch Cutting Length, 544100 #adBora #ad
- Includes bora ngx 50-inch clamp edge and Bora NGX 50-inch extension piece with connectors. Locking handle grabs work surfaces for a secure grip that won’t budge.
Use with circular saws, routers, Jig saws, and other portable power tools. Made of heavy-gauge, rigid aluminum for extreme durability. Clamping end moves with handle for easy adjustability from one side.
4. Bora #ad
BORA Cutting System Rip Guide for Circular Saws, BORA Rip Guide with Saw Plate + Rip Handle, 544008 #adBora #ad
- Easy setup: three simple steps and your Rip Guide is set up! The Saw Plate stop allows you to quickly setup your saw every time. Use with left- and right-hand saws: securely fit most left- and right-hand circular saws to the BORA Saw Plate and Rip Guide.
Repeatable accuracy: the bora rip Guide allows you to make repetitive rip cuts and crosscuts, while improving your accuracy and saving you time.
Stability: large ergonomic rip Guide handle ensures a solid grip. Precise rip cuts and crosscuts: get straight accurate rip cuts and crosscuts up to 24 inches 610mm wide on the sheet material you are breaking down.
The aluminum rail attaches securely to the Saw Plate for confident cuts. Now you can confidently make multiple cuts at once. Save time: the rip guide by bora will eliminate the need for marking and measuring each cut. Lock in your measurement and saw for accurate cuts every time.
|Manufacturer||Affinity Tool Works #ad|
5. Bora #ad
Bora Saw Guide 544006 #adBora #ad
- Improved front fence minimizes side to side tool movement. Versatile - fits right- and left-handed circular saws. Low profile front clamps allow a greater range of placement. Friction fit cut indicator doesn't require tools to adjust or lock in place.
Secure - 3 points of contact means your saw is held securely while cutting. Replaces bora saw plate - 542006. Works with the bora wtX Clamp edges and Bora NGX clamp edges. New side stop allows you to replace the tool in exactly the same place, every time.
6. Bora #ad
BORA NGX Saw Plate RT Circular Saw Guide, For Straight Cuts, designed for use with Bora NGX and WTX Clamp Edge System, Adjustable to fit most Circular Saws 546001 #adBora #ad
- Get track saw like accuracy with your circular saw - With the NGX Saw Plate 546001 you'll get track saw like results while using your existing circular saw. Make every cut smooth and clean - the Saw Plate ensures accurate cuts make your job easier and faster.
Get the best results and eliminate wasting material with off cuts! compatible with bora ngx and wtx saw guides - pair the bora NGX Saw Plate RT with any of the BORA WTX and NGX Clamp Edges to create a complete circular saw guide system! This revolutionary new saw mounting system features a quick lock mechanism that makes it easy to mount your circular saw and move quickly from one project to another.
Tool free saw mounting with new quick lock mechanism - Easy to install saw, locks in without screws or tools. Get straight cuts every time! adjustable to fit most circular saws - the borA Tool NGX Saw Plate RT Circular Saw Guide is adjustable to fit most makes and models of circular saws.
7. Bora #ad
Bora QuickCut Circular Saw Guide with Rail & Angle Assist; All-In-One Woodworking Tool, 530416 #adBora #ad
- One tool, all with one useful saw guide. With the quickcut, you can get a firm hold on your circular saw without your edge guide slipping. Measure perfectly flush angles for framing and crown molding, without doing the math.
Bora quality: bora tool is a leader in innovative power tool accessories that make your jobs and projects run smoothly. Easy grip: the large, curved handle provides extra comfort and precision. It's 16 inches long, with a 14-inch 35.
5cm guide rail for making long, straight cuts. The ruler also features imperial and metric measurements. Mark, measure, and cut with ease: save yourself the calculations of a typical tri-square with bora’s advanced cut guide.
Cut wood or soft metals with unrivaled precision at four preset angles: 22. 5°, 45°, 60°, countless uses: the bora QuickCut does the work of multiple tools, and 90°. The multiple angles on this circular saw accessory eliminate the need for a miter saw or more complex jigs. Durable: bora’s quickcut saw guide is made with strong aluminum extrusion and conveniently placed ruler marks.
|Manufacturer||Bora Portamate #ad|
8. Bora #ad
Carpentry, Securely Cut Any Angle with WTX and NGX Clamp Edge Systems, Saw Guide Accessory for Woodworking, Two-Pack, DIY, BORA Track Clamps, 542011 #adBora #ad
- Easily tighten or adjust the clamp with the speed nut and lock it in place. Cut any angle: bora track clamps can be used with the WTX and NGX Clamp Edge Systems to make cutting any angle fast, simple, and accurate.
Easy set up: attach the track clamp to the top or bottom of the rail for maximum grip. Non-marking grip: each track clamp has rubberized feet that hold tight to your material without leaving damaging indentations.
Solid, secure hold: the strong quick clamping mechanism grips wood of varying thickness, so you can make angled cuts without worrying that your straight edge will come loose. Versatile: sturdy construction makes them perfect for use as a work stop, a vise, or to increase your holding power.
|Manufacturer||Bora Portamate #ad|
9. Bora #ad
546036, BORA New 36" NGX Clamp Edge, 36-Inch Cutting Length, Straight Cut Guide for Circular Saws #adBora #ad
- Made of heavy Gauge, Rigid Aluminum. Quick lock Lever for Quick Clamping. Accurate, Fast Cuts every time. 36” cutting Capacity.
10. Bora #ad
48-Inch Cutting Length, 546050, Straight Cut Guide for Circular Saws, BORA New 48" NGX Clamp Edge #adBora #ad
- Made of heavy gauge, rigid aluminum. Quick lock Lever for Quick Clamping. 48” cutting Capacity. Accurate, Fast Cuts every time.