As an Amazon Associate I earn from qualifying purchases.
Small formed cooling argon pi 4 case that especially keeps the Raspberry Pi 4 safe from harm while still being easy to hold and carry anywhere and everywhere.

The argon case was redesigned to include two full-sized HDMI ports and Built-in IR for remote functionality. Jumpers are also included for automatic booting. The ssd connects to the raspberry Pi 4 via USB bridge at a USB 3. 0 port. The argon one raspberry pi 4 case gets the best cooling experience thanks to the Pi Fan Software while the case acts as a heatsink connected to the CPU.

The raspberry pi 4b case also includes a heatsink and 30mm software controllable fan for additional cooling. All of the gpio pins are accessible on top of the case and are protected by a removable magnetic cover; allowing you to do various Raspberry Pi projects.



The raspberry pi 4 argon fan hat easily fits in official raspberry Pi Cases and other Argon40 Cases such as the Argon NEO case and Argon POLY+ Vented Cases. The raspberry pi 4 fan hat is also pwm Controllable and Software controllable fan for full functionality and customizability while cooling your Pi Board.


All ports and slots of the aluminum alloy case can match with Raspberry Pi 4 Model B computer perfectly; Add 2pcs 2x20 Female Headers to extend the GPIO pin and insert GPIO cable.
You can also use the CPU grease not included to get better heat dissipation. Note: if you think the blue Thermal Tape is not good enough for heat dissaption, you can replace it with thin 05mm cooper heatsink match with silicone grease recommend Shin-Etsu Shin-tsu X-23-7921-5 for better heat dissaption.


With this raspberry pi sata board, your argon pi 4 case becomes an Argon ONE M. 2 case for raspberry pi 4; allowing you boot your OSes through your SSD. The ssd connects to the raspberry Pi 4 via USB bridge at a USB 3.
1. Argon Forty
#ad
And LCD Display, Argon NEO Case | Designed for GPIO and PoE Access, Camera, Cooling Fan
#adArgon Forty #ad - The argon neo case supports all available raspberry Pi 4 Model B boards including the Raspberry Pi 4 Boards with 8GB RAM, especially with its easy assembly. The raspberry pi 4 case is designed to easily fit any official Raspberry Pi HAT and Argon Pi HATs; easily allowing you to use your case however you please.Small formed cooling argon pi 4 case that especially keeps the Raspberry Pi 4 safe from harm while still being easy to hold and carry anywhere and everywhere.
More information #ad
All the gpio module, cooling fan, camera, and lcD Display Ports are accessed through the case's magnetic sliding lid; making it perfect for Raspberry Pi Makers. With the raspberry pi 4 case acting as the board's heatsink, it easily keeps your Pi cool for a variety of activities, even when running at maximum performance.Brand | Argon Forty #ad |
Manufacturer | Argon Forty #ad |
Part Number | AR_NEO_Case |
Model | AR_NEO_Case |
More information #ad
2. Argon Forty
#ad
Argon ONE M.2 Case | SATA SSD Support | B-Key and B+M Key Compatible
#adArgon Forty #ad - The argon raspberry pi 4 case has all of the GPIO pins are accessible on top of the case while they're protected by a removable magnetic cover when not in use.The argon case was redesigned to include two full-sized HDMI ports and Built-in IR for remote functionality. Jumpers are also included for automatic booting. The ssd connects to the raspberry Pi 4 via USB bridge at a USB 3. 0 port. The argon one raspberry pi 4 case gets the best cooling experience thanks to the Pi Fan Software while the case acts as a heatsink connected to the CPU.
More information #ad
The raspberry pi ssd case is only compatible with m. 2 sata ssds with b-key or B+M Key. The raspberry pi sata board is designed to maximize the high speed data transfers for Raspberry Pi 4 SSD usage; making it perfect for multimedia usage.Brand | Argon Forty #ad |
Manufacturer | Argon Forty #ad |
Height | 1.85 Inches |
Length | 4.33 Inches |
Width | 3.74 Inches |
Part Number | A20-002 AR-MDT |
Model | A20-002 AR-MDT |
More information #ad
3. Argon Forty
#ad
Argon ONE V2 Case with Power Button and Fan
#adArgon Forty #ad - The argon one raspberry pi 4 case includes two full-sized HDMI ports and Built-in IR for remote functionality. The power button behind the argon Raspberry Pi 4 Case can perform a safe shutdown, reboot, or forced shutdown upon installation of proprietary script.The raspberry pi 4b case also includes a heatsink and 30mm software controllable fan for additional cooling. All of the gpio pins are accessible on top of the case and are protected by a removable magnetic cover; allowing you to do various Raspberry Pi projects.
More information #ad
Installing the propietary script gives you full control. The argon one pi 4 case minimizes clutter by making cable management easy with all ports at the rear; practically turning the Pi4 Case to a mini computer. Jumpers are also included for automatic booting.Brand | Argon Forty #ad |
Manufacturer | Argon Forty #ad |
Part Number | AR1_Rpi4_Case Only |
Model | B07WP8WC3V |
More information #ad
4. Flirc
#ad
Flirc Raspberry Pi 4 Case Silver
#adFlirc #ad - All new manufacturing Process with improved metal quality and design. Built in heat sink and comes with a thermal pad and 4 screws.More information #ad
Gpio and all the main connectors are easily accessible through the bottom. Made for the new Raspberry Pi 4. The best looking Raspberry Pi case made out of beautiful aluminum.Brand | Flirc #ad |
Manufacturer | Flirc #ad |
Height | 1 Inches |
Length | 3.5 Inches |
Weight | 0.26 Pounds |
Width | 2.5 Inches |
Part Number | FL-70462 |
More information #ad
5. Raspberry
#ad
Raspberry Pi 4 Model B 2019 Quad Core 64 Bit WiFi Bluetooth 4GB
#adRaspberry #ad - 0 ports, 2 x usb 2. 11b/g/n/ac wireless lan, Bluetooth 5. Requires 5. 1v, 3a power via usb type C or gpio-poep power over Ethernet enabled requires PoE hat-not included. 2-lane mipi dsi/csi ports for camera and display--4-pole stereo audio and composite video port--Micro SD card slot for loading operating system and data storage.More information #ad
2. 2 × usb 3. Broadcom bcm2711, quad-core cortex-a72 arm v8 64-bit soc @ 1. 0 ports-2 × micro hdmi ports supporting up to 4Kp60 video resolution. 0, double-true Gigabit Ethernet. 4 ghz and 5. 0 ghz ieee 802. 5ghz-4gb lpddr4-2400 sdraM.Brand | Raspberry #ad |
Manufacturer | Raspberry Pi #ad |
Height | 1.18 Inches |
Length | 3.94 Inches |
Weight | 0.11 Pounds |
Width | 2.76 Inches |
Part Number | SC15185 |
Model | RAS-4-4G |
Warranty | 30 |
More information #ad
6. Argon Forty
#ad
Argon Fan HAT | 40mm Fan with Power Button | PWM and Software Controllable | Easy Setup
#adArgon Forty #ad - A raspberry pi hat with a cooling fan that prevents overheating on the Raspberry Pi 3 B and Raspberry Pi 4 so that you can use the boards to your heart's content.The raspberry pi 4 argon fan hat easily fits in official raspberry Pi Cases and other Argon40 Cases such as the Argon NEO case and Argon POLY+ Vented Cases. The raspberry pi 4 fan hat is also pwm Controllable and Software controllable fan for full functionality and customizability while cooling your Pi Board.
More information #ad
The raspberry pi fan hat is highly usable and flexible in a variety of Pi Projects, especially for Raspberry Pi Servers where Raspberry Pis are stacked. The argon pi 4 fan hat also comes with a power button that can be used to do safe shutdowns and reboots to the Pi; making it easy and safe to shutdown your boards.Brand | Argon Forty #ad |
Manufacturer | Argon Forty #ad |
Part Number | AR Fan HAT V1 |
More information #ad
7. Argon Forty
#ad
Argon NEO Case with Type-C Power Supply | Supports Cooling Fan, and LCD Display | GPIO and PoE Pins are Accessible, Camera
#adArgon Forty #ad - Small formed cooling case that especially keeps the Raspberry Pi 4 safe. Provides access to the camera module, Display Module, GPIO pins, and PoE pins.More information #ad
Comes with an 18 watt type-C Power Supply to power your Pi 4 board. Supports up to the Raspberry Pi 4 4GB model. The perfect raspberry Pi 4 Case that keeps your Pi cool even at maximum performance.Brand | Argon Forty #ad |
Manufacturer | Argon Forty #ad |
Part Number | AR_NEO_Case |
More information #ad
8. Geekworm
#ad
Geekworm Raspberry Pi 4 Armor Case, Raspberry Pi 4 Computer Model B Armor Aluminum Alloy Passive Cooling Case Compatible with Raspberry Pi 4 Model B Only
#adGeekworm #ad - Reinforced aluminum material, lightweight and durable, long-lasting stainless. With 3 pieces thermal pads the thickness is only 05mm to touch the shell body to dissipate heat. Open case design, don't need to worry about affect wifi signal, it is a good raspberry pi 4 heatsink case with good heat dissaption.All ports and slots of the aluminum alloy case can match with Raspberry Pi 4 Model B computer perfectly; Add 2pcs 2x20 Female Headers to extend the GPIO pin and insert GPIO cable.
More information #ad
Geekworm raspberry pi 4 armor case, aluminum alloy metal case specially designed for the Raspberry Pi 4 Computer Model B 1GB/2GB/4GB/8GB. You can also use the CPU grease not included to get better heat dissipation. Note: if you think the blue Thermal Tape is not good enough for heat dissaption, you can replace it with thin 05mm cooper heatsink match with silicone grease recommend Shin-Etsu Shin-tsu X-23-7921-5 for better heat dissaption.
Brand | Geekworm #ad |
Manufacturer | Geekworm #ad |
Height | 0.75 Inches |
Length | 3.39 Inches |
Weight | 0.24 Pounds |
Width | 2.17 Inches |
Part Number | TB-2019-19 |
More information #ad
9. Argon Forty
#ad
And LCD Display | GPIO and PoE Pins are Accessible, Camera, Argon NEO Case with Fan HAT and Power Supply Type-C | Supports Cooling Fan
#adArgon Forty #ad - Comes with an 18 watt type-C Power Supply to power your Pi 4 board. Provides access to the camera module, GPIO pins, Display Module, and PoE pins. The perfect raspberry Pi 4 Case that keeps your Pi cool even at maximum performance.More information #ad
Small formed cooling case that especially keeps the Raspberry Pi 4 safe. Has an additional Fan HAT to further cool your Raspberry Pi.Brand | Argon Forty #ad |
Manufacturer | Argon Forty #ad |
Part Number | AR_NEO_Case |
More information #ad
10. Argon Forty
#ad
Argon ONE M.2 Expansion Board | Supports B-Keys and B+M Keys | Only Compatible with Argon ONE V2 Cases
#adArgon Forty #ad - Adds m. 2 sata ssd compatibility to your raspberry pi 4. Package includes the following items: m. 2 ssd sata board, 4 screws, USB3. 0 bridge, plastic bottom, 2 thermal pads, 4 rubber footing, and instruction manual.With this raspberry pi sata board, your argon pi 4 case becomes an Argon ONE M. 2 case for raspberry pi 4; allowing you boot your OSes through your SSD. The ssd connects to the raspberry Pi 4 via USB bridge at a USB 3.
More information #ad
0 port. The argon m. 2 board maximizes the high speed data transfers for Raspberry Pi 4 SSD usage; making your Argon Raspberry Pi Case perfect for multimedia usage. The raspberry pi ssd case is only compatible with m. 2 sata ssds with b-key or B+M Key. These expansion boards only work with Argon ONE Raspberry Pi 4 Case, which are sold separately.Brand | Argon Forty #ad |
Manufacturer | Argon Forty #ad |
Height | 0.71 Inches |
Length | 4.33 Inches |
Weight | 0.17 Pounds |
Width | 3.82 Inches |
Part Number | A20-007-AR-MDT-EB |
Model | A20-007-AR-MDT-EB |
More information #ad