Easycargo 30pcs 3D Printer Heatsink Kit + 3M 8810 Thermal Conductive Adhesive Tape, Cooler Heat Sink for Cooling TMC2130 TMC2100 A4988 DRV8825 TMC2208 Stepper Motor Driver Module Blue 9mmx9mmx12mm

#ad
Easycargo ES-20B090912-8810 #ad - 30 pieces small anodized blue aluminum mini-heatsink include pre-applied 3m 8810 heat conductive adhesive tape for optimum heat transfer and easy installation. Dimension: 035 x 035 x 047 inch / 9mm x 9mm x 12mm L*W*H, Weight: 004 oz / 1 gr per piece. Stepper motor driver module is not included. Includes 30 pieces blue aluminum heatsink.

Can be applied for passive cooling of stepper motor Module TMC2130 TMC2100 A4988 DRV8825 TMC2208. Pre-applied 3m 8810 thermal conductive adhesive tape backing.

#ad



GENNEL 10gram Thermal Conductive Glue Silicone Plaster Viscous Adhesive Cooling Compound For LED GPU Chipset Heatsink

#ad
GENNEL GENNEL G109 #ad - Features: thermal properties, strong adhesion * Melting capacity: 0 200 ℃ / 24Hours * Evaporation: 0001% 200 ℃ / 24hours * thermal conductivity:> 1. 2w/m-k * thermal Impedance: 5. 1 * dissipation coefficient. Application: apply to all heatsinkf no fixed clip thermal paste. 100% new Heatsink plaster.

Idea for mosfet heatsink,vGA CARD Northbridge Southbridge Heatsink.

#ad



Arctic Silver Arctic Alumina 5g Premium Ceramic Thermal Cooling Adhesive Set AATA-5G

#ad
Arctic Silver AATA-5G #ad - 10gram Tube. 40 to 150 celsius temperature range. 5g set 2. 5g x 2. Gennel g109. Perfect for led GPU Chipset Heatsink. Pure electrical insulator, neither electrically conductive nor capacitive. The arctic silver alumina premium Ceramic Thermal Adhesive is a layered composite of aluminum oxide and boron nitride and is a pure electrical insulator.

Layered composite of aluminum oxide and boron nitride.

#ad



Lost ocean Copper VGA RAM Cooling Heatsinks cooler and Cable Tie8 PCS

#ad
Cosmos LYSB00637X42A-ELECTRNCS #ad - Dimension: 05 x 05 x 025 inch. Material: copper. Free Cosmos cable tie. This copper made vga ram heatsinks can reduce the VGA memory or chips temperature, which prevent system failure. Cosmos is a registered trademark uspto serial: 85-390, 937 protected by US Trademark Law, all products by Cosmos are exclusively distributed by Galaxy Tech & Leisure.

Perfect for led GPU Chipset Heatsink. Pure electrical insulator, neither electrically conductive nor capacitive. Layered composite of aluminum oxide and boron nitride. Gennel g109. 5g set 2. 5g x 2. 10gram Tube. Package included: 8 Pcs heatsinks. 40 to 150 celsius temperature range.

#ad



BCP 1roll 20mm x 25m Double Side Adhesive Thermal Conductive Tape for Heatsink LED

#ad
BCP NA #ad - Package included: 8 Pcs heatsinks. Layered composite of aluminum oxide and boron nitride. Size w x l: 20mm x 25m; material: glass fiber+ rubber; Strong adhesive. Product specification: Glass fiber thickness: 01mm thermal conductivity:1 w/m-k Breakdown Voltage: 3KVAC Thermal impedance : 03℃in2/w adhesive power:6.

5 n/cm volume resistance: 3x1013ohm/cm Applicable temperature range:-20~+120 °C Gennel g109. Material: copper. Perfect for led GPU Chipset Heatsink. Pure electrical insulator, neither electrically conductive nor capacitive. Noted: heatsink is not included. Dimension: 05 x 05 x 025 inch. Used for attaching heatsinks to CPU GPU, high power LED, etc.

BCP 1roll 20mm x 25m Double Side Adhesive Thermal Conductive Tape for Heatsink LED #ad - Double side adhesive Thermal Conductive Tape for hesatsink led. 40 to 150 celsius temperature range. Free Cosmos cable tie. 10gram Tube.

#ad



Easycargo 100pcs Heatsink Kit Small Cooler Heat Sink Set for Cooling Development Board Laptop CPU GPU VGA RAM VRAM VRM IC Chips LED MOSFET Transistor SCR Southbridge Northbridge Voltage Regulator

#ad
Easycargo ES-V10 #ad - Gennel g109. Pure electrical insulator, neither electrically conductive nor capacitive. Free Cosmos cable tie. Noted: heatsink is not included. Update version: 100pcs 18+82 small to medium sizes of heat sink. Small anodized aluminium: 20pcs 9x9x5mm, 8pcs 10x10x10mm, 8pcs 11x11x5mm L*W*H. Dimension: 05 x 05 x 025 inch.

Can be used for cooling of variety of electrical components such as development Boards VRAM VRM CPU GPU VGA RAM IC Chips LED Laptop MOSFET Transistor SCR Southbridge Northbridge Voltage Regulators. Used for attaching heatsinks to CPU GPU, high power LED, etc. Double side adhesive Thermal Conductive Tape for hesatsink led.

Easycargo 100pcs Heatsink Kit Small Cooler Heat Sink Set for Cooling Development Board Laptop CPU GPU VGA RAM VRAM VRM IC Chips LED MOSFET Transistor SCR Southbridge Northbridge Voltage Regulator #ad - This set of cooler heat sink includes 10 different small to medium range sizes of heatsinks. Size w x l: 20mm x 25m; material: glass fiber+ rubber; Strong adhesive. Package included: 8 Pcs heatsinks. It is totally composed of 100pcs of heatsinks including: small anodized aluminium: 20pcs 9mmx9mmx5mm, 8pcs 11mmx11mmx5mm; Medium anodized Aluminium: 8pcs 14mmx14mmx7mm, 8pcs 20mmx20mmx6mm, 8pcs 10mmx10mmx10mm, Silver Tone Aluminium: 20pcs 7mmx7mmx6mm, 2pcs 22mmx22mmx10mm, 8pcs 19mmx19mmx5mm, 10pcs 8.

5mmx8. 5mmx8mm, 8pcs 15mmx15mmx6.

#ad



Halnziye 10Gram Thermal Conductive Glue Silicone Plaster Viscous Adhesive Cooling Compound for LED GPU Chipset Heatsink

#ad
Halnziye HY910-T10 #ad - Application: apply to all heatsinkf no fixed clip thermal paste. Features: thermal properties, strong adhesion * Melting capacity: 0 200°C/392°F / 24Hours * Evaporation: 0001% 200°c/392°f / 24hours * thermal conductivity:> 1. 2w/m-k * thermal Impedance: 5. 1 * dissipation coefficient 1. 2w/m-K. Application: apply to all heatsink no fixed clip thermal paste.

Idea for mosfet heatsink, vGA CARD Northbridge Southbridge Heatsink. Strength of connected buildings: 55 lb. Features: thermal properties, strong adhesion. Ideal for mosfet heatsink,VGA CARD Northbridge Southbridge Heatsink.

#ad



ANTCLABS BLTouch : Auto Bed Leveling Sensor/To be a Premium 3D Printer With 1M Extension Cable Set

#ad
ANTCLABS #ad - Application: apply to all heatsink no fixed clip thermal paste. Layered composite of aluminum oxide and boron nitride. Size w x l: 20mm x 25m; material: glass fiber+ rubber; Strong adhesive. Pure electrical insulator, neither electrically conductive nor capacitive. 5g set 2. 5g x 2. Perfect for led GPU Chipset Heatsink.

Package included 1roll. Do not use thermal glue between cpU Chip And Heat Sink, use it within 24 hours once opened. Thermal conductivity:> 1. 2w/m-K. Gathering information and firmware setting will be an easy task, because BLTouch works as usual auto bed leveling sensor. Self-test: the push pin is operated three times to test when the power is on.

ANTCLABS BLTouch : Auto Bed Leveling Sensor/To be a Premium 3D Printer With 1M Extension Cable Set #ad - Alarm: the led light blinks if a problem found on a self-test or on an operation. High-precision: blTouch's Standard Deviation in repeatability is around 0005mm. Main functions and controls of BLTouch are same as usual auto bed leveling sensor, consists of RC servo and micro switch. Package included: 8 Pcs heatsinks.

Thus, bltouch can be applied on almost every board.

#ad



3D Printer Heatsink Kit + Thermal Conductive Adhesive Tape, Cooler Heat Sink Cooling TMC2130 TMC2100 A4988 DRV8825 TMC2208 Stepper Motor Driver Module 22pcs

#ad
SGTKJSJS #ad - Ideal for mosfet heatsink,VGA CARD Northbridge Southbridge Heatsink. Bltouch is an auto leveling sensor for 3D Printers based on open-source. Simple, smart, High-precision. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on. Come with 1m extension cable set. Excellent 3dprinter heat sinks and thermal pad: work well for can be applied for passivecooling of Stepper Motor Module TMC2130 TMC2100 A4988 DRV8825 TMC2208 Gennel g109.

Do not use thermal glue between cpU Chip And Heat Sink, use it within 24 hours once opened. Thermal conductivity:> 1. 2w/m-K. Dimension: 05 x 05 x 025 inch. 22 pieces smallanodized blue aluminum mini-heatsink include thermal conductive adhesive tapebacking for optimum heat transfer and easy installation. 5g set 2.

3D Printer Heatsink Kit + Thermal Conductive Adhesive Tape, Cooler Heat Sink Cooling TMC2130 TMC2100 A4988 DRV8825 TMC2208 Stepper Motor Driver Module 22pcs #ad - 5g x 2. Noted: heatsink is not included. 40 to 150 celsius temperature range. Package included: 8 Pcs heatsinks.

#ad



60pcs Mini Heatsink Kit, Cooler Heat Sink for Cooling VRM Stepper Driver MOSFET VRam Regulators 8.8mmx8.8mmx5mm Black

#ad
SGTKJSJS #ad - Dimension: 05 x 05 x 025 inch. Pure electrical insulator, neither electrically conductive nor capacitive. Ideal for mosfet heatsink,VGA CARD Northbridge Southbridge Heatsink. Bltouch is an auto leveling sensor for 3D Printers based on open-source. Simple, smart, High-precision. It could work with any kinds of bed materials, woods, metals, such as glasses, and so on.

Come with 1m extension cable set. Used for attaching heatsinks to CPU GPU, high power LED, etc. Double side adhesive Thermal Conductive Tape for hesatsink led. With thermal conductive adhesive tape backing. 8. 8 x 8. 8 x 5mml*W*H. 10gram Tube. Note firmware update: this item requires a firmware update. Dimension: 035 x 0

60pcs Mini Heatsink Kit, Cooler Heat Sink for Cooling VRM Stepper Driver MOSFET VRam Regulators 8.8mmx8.8mmx5mm Black #ad - 35 x 047 inch / 9mm x 9mm x 12mm L*W*H, Weight: 004 oz / 1 gr per piece.

#ad



OVERTURE PETG Filament 1.75mm with 3D Build Surface 200 x 200 mm 3D Printer Consumables, 1kg Spool 2.2lbs, Dimensional Accuracy +/- 0.05 mm, Fit Most FDM Printer, Black

#ad
OVERTURE #ad - Update version: 100pcs 18+82 small to medium sizes of heat sink. Small anodized aluminium: 20pcs 9x9x5mm, 8pcs 10x10x10mm, 8pcs 11x11x5mm L*W*H. Grid layout on the surface for easy resizing. As the petg material is sensitive to moisture, please remember to put it back into the re-sealable aluminum foil bag timely after using to maintain excellent printing result.

Complete drying for 24 hours before vacuum aluminum foil packaging, which can effectively protect the PETG filament from moisture. Package included 1roll. Noted: heatsink is not included. Application: apply to all heatsink no fixed clip thermal paste. Stepper motor driver module is not included. Material: copper.

OVERTURE PETG Filament 1.75mm with 3D Build Surface 200 x 200 mm 3D Printer Consumables, 1kg Spool 2.2lbs, Dimensional Accuracy +/- 0.05 mm, Fit Most FDM Printer, Black #ad - Weight: 003 oz / 09 gr per piece. Can be applied for passive cooling of stepper drive, Vram, VRM, computers, MOSFET, IC Chips raspberry pi models pi electronics, electrical appliances, and heat dissipation etc.60pcs small mini Heatsink Kit+1 thermal adhesive. 1 kg petg spool x 1 & build surface x 1】 each petg spool comes with 1 piece of quality 200 × 200 mm / 7.

#ad