Anderson Metals 56122 Brass Pipe Fitting, Hex Nipple, 1/4″ x 1/4″ NPT Male Pipe 2 PACK

#ad
Anderson Metals #ad -
#ad



Bostitch BTFP72326 Regulator and Gauge Kit with 1/4-Inch NPT Thread

#ad
Bostitch BTFP72326 #ad - 15 gpm rating. The bo stitch btfp72326 regulator and gauge kit, 1/4" NPT Thread replaces air pressure from your compressor to match the recommended air pressure required by your air tool. Pressure range of 0-160 PSI, with a 15 GPM rating. Air flow must be in direction of the arrow. Replaces air pressure from your compressor to match the recommended air pressure required by your air tool.

Air flow must be in direction of the arrow.

#ad



Anderson Metals 56101 Brass Pipe Fitting, Barstock Tee, 1/4" x 1/4" x 1/4" NPT Female Pipe

#ad
Anderson Metals 56101-04 #ad - Operating temperature range of -65 to +250 degrees F. This fitting meets american society for testing and materials ASTM B584 and American Society of Mechanical Engineers ASME/American National Standards Institute ANSI B16 specifications for quality assurance. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries.

Brass can be connected to copper, aluminum, plastic, brass, and welded steel. Replaces air pressure from your compressor to match the recommended air pressure required by your air tool. Meets astm b584 standards for quality assurance and ASME/ASMI B16 technical specifications. Female npt threads for connecting to male threaded pipes.

Anderson Metals 56101 Brass Pipe Fitting, Barstock Tee, 1/4" x 1/4" x 1/4" NPT Female Pipe #ad - The company, is headquartered in Kansas City, founded in 1951, MO. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. The tee fitting is t-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee.

The fitting has an operating temperature range of -65 to +250 degrees F. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.

#ad



ARO F35121-400-VS Air Line Filter, 1/4" NPT - 150 psi Max Inlet

#ad
Ingersoll Rand F35121-400-VS #ad - 49 cfm. Air flow must be in direction of the arrow. 05-ounce polycarbonate bowl with guard. And its territories. 1/4-inch NPT. Manual drain. Meets astm b584 standards for quality assurance and ASME/ASMI B16 technical specifications. Female npt threads for connecting to male threaded pipes. 15 gpm rating. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

Operating temperature range of -65 to +250 degrees F. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U. S. A. Tee with three openings for connecting and branching three pipes. Aro-flo 1000 series inline filter-1/4"" npt port-49 scfm-3 micron filtration-150 psig max inlet Pressure-23-125°F Temperature Range-Polycarbonate Bowl w/ guard-Manual Drain Replaces air pressure from your compressor to match the recommended air pressure required by your air tool.

ARO F35121-400-VS Air Line Filter, 1/4" NPT - 150 psi Max Inlet #ad - Standard Filter - 5 Microns.

#ad



NIGO 240SS Series Forged Brass Mini Gas Ball Valve, CSA Certified, Lever Handle, NPT Female, Standard Port 600WOG 1/4"

#ad
Nigo Industrial Co. #ad - These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U. S. A. Air flow must be in direction of the arrow. Tee with three openings for connecting and branching three pipes. 05-ounce polycarbonate bowl with guard. Operating temperature range of -65 to +250 degrees F.

15 gpm rating. Replaces air pressure from your compressor to match the recommended air pressure required by your air tool. Meets astm b584 standards for quality assurance and ASME/ASMI B16 technical specifications. Manual drain. Female npt threads for connecting to male threaded pipes. Standard port design. Products features  * csa approved manually operated gas valve for use in house piping system, appliances, appliance connector valves and hose end valves * All Nigo's products conform to specifications ASTM American Society for Testing and Materials B124 and B16 * NPT threads on all Nigo's products meet ASME B1.

NIGO 240SS Series Forged Brass Mini Gas Ball Valve, CSA Certified, Lever Handle, NPT Female, Standard Port 600WOG 1/4" #ad - 201 * designed for use in air, nature, mixed, manufactured, liquefied petroleum or propane and LP Gas-Air * Use with brass, steel, oil, water, and iron pipe; Teflon tape and thread sealant are recommended for threaded joints * Temperatures range from -4 to 194 F * Max. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

#ad



250 psi Max Inlet - ARO R37121-600-VS Air Regulator 1/4" NPT, w/ Gauge

#ad
Ingersoll Rand R37121-600-VS #ad - Metalworking. Commercial Brand: Ingersoll-Rand. And its territories. 1/4-inch NPT. Air flow must be in direction of the arrow. Manual drain. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U. S. A. Female npt threads for connecting to male threaded pipes. Meets astm b584 standards for quality assurance and ASME/ASMI B16 technical specifications.

Standard port design. 49 cfm. Rated to 600 pSI WOG. Csa certified. Tee with three openings for connecting and branching three pipes. Imported from: South Korea. Operating temperature range of -65 to +250 degrees F. 05-ounce polycarbonate bowl with guard. Standard Filter - 5 Microns. Connections: female NPT x Female NPT.

250 psi Max Inlet - ARO R37121-600-VS Air Regulator 1/4" NPT, w/ Gauge #ad - Aro-flo 1000 series air regulator-1/4"" npt port-59 scfm-250 psig max inlet pressure-0-140 psig regulator Pressure Range-Flush Mount Pressure Gauge-23-140°F Temperature Range Replaces air pressure from your compressor to match the recommended air pressure required by your air tool.

#ad



WYNNsky 1/4" Heavy Duty Brass Ball Valve Shut Off Switch, 1/4 Inch Male And Female NPT Thread Pipe Fitting

#ad
WYNNsky #ad - Can be used to give your tool full air flow to total shut-off. Standard Filter - 5 Microns. 49 cfm. Standard port design. Female npt threads for connecting to male threaded pipes. Metalworking. It is made of forged brass for higher corrosion resistance than steel and has a plastic-covered lever handle for on/off manual control.

And its territories. 1/4-inch NPT. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Designed for use on all pneumatic circuits and features a quick connect/disconnect positive seal. Do not over tighten. Tee with three openings for connecting and branching three pipes.

WYNNsky 1/4" Heavy Duty Brass Ball Valve Shut Off Switch, 1/4 Inch Male And Female NPT Thread Pipe Fitting #ad - Csa certified. Imported from: South Korea. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U. S. A. Replaces air pressure from your compressor to match the recommended air pressure required by your air tool. We deliver the most saving and best value to our customers.

#ad



5 Micron, Poly Bowl, Manual Drain, Bracket - PneumaticPlus PPF2-N02B Miniature Compressed Air Particulate Filter 1/4" NPT

#ad
PneumaticPlus PPF2-N02B #ad - When used as a pre-filter to a coalescing filter, it will increase the life of the coalescing element by 4 to 6 times. Standard Filter - 5 Microns. Pneumatic plus ppf series particulate filters remove harmful oil/water condensate, pipe scale, dirt and rust from your compressed air system. Tee with three openings for connecting and branching three pipes.

Each filter is equipped with a highly efficient baffling system for maximum bulk liquid and dirt particle removal. Female npt threads for connecting to male threaded pipes. 28 microns. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Csa certified. The beta efficiency rating is 99.

5 Micron, Poly Bowl, Manual Drain, Bracket - PneumaticPlus PPF2-N02B Miniature Compressed Air Particulate Filter 1/4" NPT #ad - Typically, particulate filters are installed upstream of regulators to prevent valve failure. They are also used as pre-filters to oil removing and coalescing filters to insure high efficiency and long element life in applications such as paint spraying, instrumentation and pharmaceuticals. Connections: female NPT x Female NPT.

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Red plastic-covered lever handle for on/off manual control. The outside thread with sealant for better sealing.

#ad



Boeray 2pcs Brass Fitting, 90 Degree Barstock Street Elbow, 1/4" NPT Male Pipe to 1/4" NPT Female Pipe

#ad
Boeray #ad - Operating temperature range of -65 to +250 degrees F. 49 cfm. Connections: female NPT x Female NPT. 15 gpm rating. Metalworking. Manual drain. Manufactured in Korea. Air flow must be in direction of the arrow. The operating temperatures for this fitting range from -53 to 121 degrees C -65 to 250 degrees F. Imported from: South Korea.

Port size: 1/4" NPT. And its territories. 1/4-inch NPT. 05-ounce polycarbonate bowl with guard. Commercial Brand: Ingersoll-Rand. Adapts 1/4" npt male end to 1/4" tube size female end at a 90-degree angle. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Replaces air pressure from your compressor to match the recommended air pressure required by your air tool.

Boeray 2pcs Brass Fitting, 90 Degree Barstock Street Elbow, 1/4" NPT Male Pipe to 1/4" NPT Female Pipe #ad - Poly bowl, manual Drain, Bracket Included. For use with lp and natural gas, refrigeration, and hydraulic applications. Meets specifications astm b584 and ASME/ANSI B16 for quality assurance. Boeray 2pcs brass fitting, 90 degree barstock street elbow, control, 1/4" NPT Female Pipe Specification:Hose tube fittings connect, 1/4" NPT Male Pipe, change the direction of, and terminate the flow in piping and hose systems.

#ad



Anderson Metals 06102 Brass Pipe Fitting, Barstock Cross, 1/4" x 1/4" x 1/4" x 1/4" NPT Female Pipe

#ad
Anderson Metals 06102-04 #ad - For use with lp and natural gas, refrigeration, and hydraulic applications. Connections: female NPT x Female NPT. Standard port design. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Female npt threads for connecting to male threaded pipes. Female npt threads for connecting to male threaded pipes.

Blowout proof stem design. The cross fitting has four openings positioned at 90-degrees from each other for connecting and branching four pipes. Imported from: South Korea. Standard Filter - 5 Microns. Fittings are available threaded or unthreaded, sizes, styles, in many shapes, and schedules pipe wall thickness.

Anderson Metals 06102 Brass Pipe Fitting, Barstock Cross, 1/4" x 1/4" x 1/4" x 1/4" NPT Female Pipe #ad - Anderson metals manufactures brass fittings, valves, and pipe nipples. 05-ounce polycarbonate bowl with guard. This anderson metals 06102 barstock cross is a brass pipe fitting with 1/4" female NPT threads. Metalworking. Commercial Brand: Ingersoll-Rand. It has female national pipe taper NPT threads for connecting to male threaded pipes, creating a tighter seal than straight threads and a locknut for increased stability.

#ad



Anderson Metals Brass Pipe Fitting, Long Nipple, 1/4" x 1/4" Male Pipe, 2" Length

#ad
Anderson Metals 56113-0432 #ad - Brass can be connected to copper, brass, aluminum, plastic, and welded steel. Csa certified. The anderson metals long nipple pipe fitting is made of brass and has male National Pipe Taper NPT threaded connections. Meets specifications astm b584 and ASME/ANSI B16 for quality assurance. Rated to 600 pSI WOG. 05-ounce polycarbonate bowl with guard.

. And its territories. Long nipple for connecting two threaded pipes. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U. S. A. Air flow must be in direction of the arrow. Standard Filter - 5 Microns. Replaces air pressure from your compressor to match the recommended air pressure required by your air tool.

Anderson Metals Brass Pipe Fitting, Long Nipple, 1/4" x 1/4" Male Pipe, 2" Length #ad - Poly bowl, manual Drain, Bracket Included. Male national pipe Taper NPT threads for connecting to female threaded pipes. Connections: female NPT x Female NPT. Female npt threads for connecting to male threaded pipes.

#ad